Cart 2 india

Specification
Brand : Stylebest
BulletPoint1 : Strong Compatibility: PEI build plate size is 255x255mm, suitable for Voron and other . The printing size of the spring steel of the 3D printer can be perfectly compatible with the machine.
BulletPoint2 : Cold Printing and Frost Effect: Strong adhesion, no glue, this PEI build plate can achieve cold printing, and printing without warping , printed products with frosting effect on the bottom, beautiful.
BulletPoint3 : Double Sided: When the temperature of the heated bed is around 60°C, excellent adhesion is achieved and you can print directly on each side of the double sided PEI without using additional tools.
BulletPoint4 : How to Operate: When the temperature of the heating bed reaches room temperature, the printed piece easily falls off the PEI plate. If the print gets stuck, gently bending the plate will help remove the print.
BulletPoint5 : Thickness: This 's PEI coating thickness 0.25mm, and spring plate thickness 0.4mm, magnetic rubber plate thickness 1.2mm. The overall thickness is about 2mm.
Color : One Color
ExternallyAssignedProductIdentifier : 7649657618348
ItemName : 3D Printer Spring Steel Build Plate Double Sided PEI Powder Sprayed Magnetic 255x255mm for Voron
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 29 centimeters
ItemPackageDimensions_Width : 29 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Stylebest
ModelName : Stylebestq2kf0ze9p3
ModelNumber : Stylebestq2kf0ze9p3
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Stylebestq2kf0ze9p3
ProductDescription : Specification:
Item Type: Magnetic Spring Steel Plate
Material: PEI Spraying Powder, Spring Steel, Soft Magnet
Size: Approx. 255 x 255mm / 10 x 10in
Use: Good 3D Printer Accessory Tool
PEI Spraying Thickness: Approx. 0.25mm / 0.01in
Spring Steel Plate Thickness: Approx. 0.4mm / 0.02in
Magnetic Rubber Plate Thickness: Approx. 1.2mm / 0.05in
Overall Thickness: Approx. 2mm / 0.08in

How to Use:
Direct installation and use.

packing list:
1 x Spring Steel Plate
1 x Magnetic Rubber Plate

Note:
It will also print PETG well, but the temperature of the hot bed needs to be around 80‑85°C.
ProductSiteLaunchDate : 2025-02-25T07:36:07.352Z
Size : One Size
UnitCount : 1
UnspscCode : 40000000