Cart 2 india

Specification
Brand : ACROSSXD
BulletPoint1 : 【Excellent Adhesion】-Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off. Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet.
BulletPoint2 : 【Metal Material】 - Metal material is stronger, it will twist more tightly than plastic nuts.
BulletPoint3 : 【More Affordable and Practical】 - The torque of these nuts is large, making it easier to fine tune the hot bed.We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C，Wear-Resistant and Scratch-Resistant, easy to clean
BulletPoint4 : 【Package List】-PEI Sheet 235mmx235mm and Magnetic Sticker with Adhesive，4Pcs Metal Leveling Nuts and Springs Upgraded Set
BulletPoint5 : 【Suitable for】-Ender 3/3 Pro/3 V2/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro/Ender 5/CR-10
IncludedComponents : 1PC PEI Sheet Magnetic＋4PCS Aluminum Hand Twist Leveling Nut＋4PCS springs
ItemName : ACROSSXD PEI Sheet 235x235mm Magnetic Flexible Heated Bed with Aluminum Hand Twist Leveling Nut for Ender 3/Ender 3 V2/Ender 3 S1/Ender 3 S1 pro/Ender 3 neo/Ender 3 v2 neo/Voxelab Aquila 3D Printer
ItemPackageDimensions_Height : 28.9052 centimeters
ItemPackageDimensions_Length : 3.4036 centimeters
ItemPackageDimensions_Width : 27.305 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : ACROSSXD
ModelNumber : PEI-235
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PEI-235
ProductDescription : Introduction to the new zone heating hot bed:

Advantage 1: This hot bed uses zone heating without the support of the main board, and the hot bed can also achieve zone heating in the middle range of 125 * 125MM. It is applicable to more than 90% of ENDER-3 series models on the market.

Advantage 2: The heating time is 20% faster than that of ordinary hot bed.

Advantage 3: When the printing model range is within the middle range of 125MM * 125MM, there is a partition switch on the hot bed to turn it off, which can save 60% of the electricity. The measured 24 hours can save 0.5 kilowatt-hour electricity, and achieve energy saving.

Advantage 4: The new zonal hot bed adopts a new spray technology. The black spray is more viscous than the gold PEI. When the printing PLA temperature is at 60 degrees, the viscosity is 20% better than the gold PEI.

Advantage 5: The new PEI spray has its own zone indication range, which is easier to drop than the printing on the market, and has been perfectly solved on our new black PEI.

Advantage 6: The new zoned heat bed uses an intermediate heat insulation slot to make the temperature in the range of 125 * 125MM in the middle transmit to the edge more slowly, thus solving the unnecessary heat loss.
ProductSiteLaunchDate : 2023-03-22T16:40:45.837Z
Size : 235*235
Style : Zone-Heating Hot Bed
UnspscCode : 31160000