Cart 2 india

Specification
Brand : FYSETC
BulletPoint1 : FDM 3D print hotbed Necessary Component: 120mm magneti build plate, the sticker's material is plastic, so its ideal temperature for printing is about 50-75℃/ 122-167℉, it means this 3d printer bed mat only fit for PLA PLA+ WOOD or TPU, not work well for PETG ABS ASA and other printing material that need higher temperature(75℃+/ 167+℉). Every printing plate's material has its advanture and limited, if you have PEI steel sheet or glass bed, but often print some small pla or pla+ filament models, then get one for spare
BulletPoint2 : Easy to install: 2 in 1 heated bed cover kit - come with plastic surface and strong adhesive backing sticker, if can not stick well, please rotate the build surface 90 degrees to get it to adhere well. Better adhesion, you have to make sure there's no dust or debris on your bed before applying the magnet, otherwise there will be a bump on the print surface. Also, be ready to adjust your Z step motor because your height may be off enough that the leveling knobs don't do it
BulletPoint3 : Easy to remove (PLA PLA+ only): No problem with adhesion, the plastic adheres well to the cover and is easy to remove once the print is completed
BulletPoint4 : Flexible 120mm x 120mm build plate: This print bed a must have tool for 3D printing. Material: made of plastic, it is not metal
BulletPoint5 : Size: square 120X120mm/ 4.7*4.7inch, magneet stick's thickness is about 1.2mm(strong enough). compatible with Voron0.2 Pro, Vorn 0/ VoronV0.1 V0.2 fdm machine, if need 6.49in 7in or round 4.7in, please enter our shop. The size can cut for other smaller size. Before ordering, please measure your real heat bed, if you can accept 5-10mm, need 100mm build plate, or 100x120mm build plate, then get it
BulletPoint6 : Products and Services: You will receive 1 black textured PEI spring steel build plate. And if you have any questions, we will provide solutions with in twenty-four hours
Color : Black
GpsrSafetyAttestation : 1
IncludedComponents : Metal plate sheet
ItemName : FYSETC 3D Printer Platform 120mm Flex Plate - Removable Print Bed Surface - Magnnetic Spare HotBed Cover: 2 in 1 Printing Build Surface for PLA PLA+ Only Compatible with VoronV0 V0.2 Accessories 4.7in
ItemPackageDimensions_Height : 17.9 centimeters
ItemPackageDimensions_Length : 0.9 centimeters
ItemPackageDimensions_Width : 13.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Fuyuansheng
Material : plastic
ModelNumber : dsfen OS6799
NumberOfBoxes : 1
NumberOfItems : 2
PartNumber : US-120mm Magetic Platform Kit
Pattern : Dual-Sided Printing PET "Phantom" Platform
ProductDescription : What do you get?
1Pcs Plastic Magneticsheet
1Pcs magnetsticker that with strong adhesive cover on back.

(1)ATTENTION BEFORE USE: As far as removing the prints- you need to have some patience and wait for the print to cool, then you can bend the surface enough that it makes peeling it off the bed FAR easier that the original print surface.
(2) Adjust the bed leveling well, or the hotend nozzle will damage the plastic surface.
(3)Our kindly suggestion: If you work with PETG or ABS for extended periods of time— above 80C for longer than 24 hours then stick with glass bed or pei spring steel plate… the magnets get demagnetized apparently
(4) Easy to care for, just a little dish soap and water every now and again makes it like new.

ProductSiteLaunchDate : 2023-11-01T09:37:17.551Z
Style : PEO PET build plate
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31160000