Cart 2 india

Specification
AdditionalPrinterFunctions : print_only
Brand : GO-3D PRINT
BulletPoint1 : Size: 200mm x 270mm x 3mm
BulletPoint2 : To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass.
BulletPoint3 : Flat Polished Edge for safe to handle
BulletPoint4 : Compatible with Qidi X-Plus and 3D Printer w/ 200mm X 270mm print platform
BulletPoint5 : Designed by GO-3D Print in Califonia
BulletPoint6 : Simple Daily Maintenance:Before printing, you can clean the GECO plate by wiping it with alcohol or using soapy water to remove dust, oil, and fingerprints, and then Select "Textured PEl Plate" and set temperature to plate.
BulletPoint7 : Note:Our "no heating" is the result of testing at room temperature of about 20℃. If your room temperature is very low, please increase the temperature to 20-40℃. If the object you print is a batch of mini object or a large object, it is recommended to add a brim or increase the temperature.
BulletPoint8 : Widely Cpmpatible:It is suitable for Bambu Lab P1P/P1S/X1C/X1/X1E/A1 3D Printer.GECO plate has a beautiful surface texture and a full sci-fi style.The print will not transfer the surface texture,which can keep the bottom ofyour print delicate and uniform with coordinated texture.
BulletPoint9 : Maintain Build Plate:After long-term repeated use, the plate needs to be repaired and cleaned. Set the temperature to 55°C and print the first layer that occupies the entire plateRemove the first layer immediately after printing. This wil restore the plate's adhesion to its original state.
Color : white
ConnectivityTechnology : USB
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 799924452063
ExternallyAssignedProductIdentifier2 : 0799924452063
GpsrSafetyAttestation : 1
HardwareInterface : usb
IncludedComponents : Glass Plate
ItemName : GO-3D PRINT 200mm x 270mm Borosilicate Glass Plate for Qidi X-Plus 3D Printer
ItemPackageDimensions_Height : 36.576 centimeters
ItemPackageDimensions_Length : 3.81 centimeters
ItemPackageDimensions_Width : 27.432 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : GO-3D PRINT
MediaSizeMaximum : 200mm x 270mm
MemoryStorageCapacity : 64 MB
ModelName : Qidi X-Plus
ModelNumber : f640705e-ecb9-4f03-a12f-75b9a2026107
ModelSeries : X-Plus
NumberOfBoxes : 1
NumberOfDrivers : 1
NumberOfItems : 1
PartNumber : GP-200x270
PrinterOutput : Monochrome
PrintMediaType : labels
ProductDescription : Package includes 1 Glass Plates for your convenience when you are printing different materials. Glass is a universal print surface for 3D Printing. Almost all types of filament will print to glass in one way or another. Just place the glass on your print board and clip it in place! To print with ABS or PLA, lightly spray the surface of the glass with AquaNetTM hairspray, then install the glass. For Nylon, we've found a light coating of UHU Glue stick seems to do the trick! If you don't yet have a glass surface, you'll want this one! This glass has been specially ordered and modified for use in 3D Printers. This type of glass is not available at your local hardware store or big box home center. Size: 200mm x 270mm x 3mm, good fit all 3D Printers with 200mm x 270mm or bigger printbed.
ProductSiteLaunchDate : 2020-06-08T07:00:00.000Z
Size : 257x257mm
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 1
UnspscCode : 44103100