Cart 2 india

Specification
AgeRangeDescription : adult
Brand : GRGRG
BulletPoint1 : Both sides can be printed, and one hot bed can provide two material usage experiences.
BulletPoint2 : PEO has patterns, making it more innovative
BulletPoint3 : PEI is Durable and scratch resistant .
BulletPoint4 : The adhesion of PEO surface is better than that of PET.
BulletPoint5 : Flexible and Easy to Remove: The double side print bed is flexible and easy to disassemble. Once the is cooled, the printing model can be easily removed by hand, or bent to remove them without deformation
Color : Peo 270 With Base
CompatibleDevices : Personal Computer
ExternallyAssignedProductIdentifier : 8216356273629
IncludedComponents : Blu-ray
ItemName : GRGRG Round Dia 270mm Double Sided Powder Coated Textured PEI and Smooth PEO Steel Sheet Build Plate Compatible with Flsun Super Racer(PEO 270 with Base)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : NBLINGKAI
Material : Metal
ModelName : 9875
ModelNumber : 9875
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 9875
ProductDescription : 1.When printing PLA , the bottom (first layer) is relatively smooth, and when it is above 60 , the adhesive strength is strong; When the temperature is below 60 , the adhesive strength is weak, and the printed piece easily falls off and cannot be printed.
2.When printing PETG, the bottom (first layer) is relatively smooth, and when it is above 60 , it has a certain degree of stickiness and is easy to peel off; When the temperature is above 65 , the viscosity is strong; When the temperature is below 60 , the adhesive strength is weak, and the printed piece easily falls off and cannot be printed.
Suggested printing temperature: PLA 60 PETG 70
Advantage:
1. Both sides can be printed, and one hot bed can provide two material usage experiences.
2. PEO has patterns, making it more innovative
3. PEI is Durable and scratch resistant .
4.The adhesion of PEO surface is better than that of PET.
Product Usage:
1. Place it on a magnetic sticker and magnetically absorb the steel plate
2. Suggested printing Filament for PEO surface: PLA/PETG. The adhesion of ABS is not as strong, but compared to PET surface, ABS has better adhesion.
3. It is recommended to print filament such as PLA/PETG on the PEI surface. If printing ABS, it is recommended to seal the box and print.
ProductSiteLaunchDate : 2024-06-01T00:59:00.847Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 52140000
WarrantyDescription : hiBCTR