Cart 2 india

Specification
Brand : HzdaDeve
BulletPoint1 : Compatible Printer: This PEI textured bed is compatible with Creality K2 Plus/Combo 3D Printer.
BulletPoint2 : Excellent Adhesion With spraying PEI spring steel plate, it has strong adhesion to adhere the model in a better way. You can use either side.
BulletPoint3 : Excellent Flatness: It provides the most flat build surface in the market, ensuring high flatness for the bottom of print, to make sure the model can be firmly attached to the surface of the print platform.
BulletPoint4 : It's easy to remove the prints when the PEI sheet cools down to around 40°C. If it's stuck, please gently bend the build plate to pop it off.
BulletPoint5 : Notes: Attention: For better adhesion, please spray with isopropanol and wipe the platform with a lint free towel before use. Any grease or residue will make your print non-stick.
IncludedComponents : bed mat for Creality K2 Plus
ItemName : HzdaDeve 370X370MM Build Plate for Creality K2 Plus/Combo One Sided Textured PEI Sheet Platform Flexible Spring Steel Bed Board Heated Sheet Glue-Free Printing for Creality 3D Printer (Black)
ItemPackageDimensions_Height : 40.64 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 40.64 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : HzdaDeve
ModelNumber : platform for K2 plus Combo
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Heated Bed Creality K2 Plus
ProductDescription : HzdaDeve 370X370MM Build Plate for Creality K2 Plus/Combo One Sided Textured PEI Sheet Platform Flexible Spring Steel Bed Board Heated Sheet Glue-Free Printing for Creality 3D Printer (Black)

Specification:
Material: PEI + steel plate
One-sided bed: One side is a textured PEI bed
Compatible 3D Printer: for Creality K2 Plus/Combo

Package Include:
1 X Build Plate (Black)

Note:
1. Due to the thickness of the sticker, please adjust the height of your Z axis
2. When it get dirty on the surface, please just wipe down with isopropyl alcohol between prints for best results.
3. Light sanding with 600-1000 grit sand paper can be done after lots of printing to give the PEI sheet more life.

After-Sale Service:
If there are any questions, just contact us freely, a satisfactory solution will be provided within 24 hours
ProductSiteLaunchDate : 2024-10-21T06:19:07.845Z
Style : K2 Plus
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31160000