Cart 2 india

Specification
AdditionalPrinterFunctions : print_only
Brand : IdeaFormer IR3
BulletPoint1 : 【Smooth PEO+PET Holographic Build Plate】The diamond PEO and carbon fiber PET holographic effect sheet provides you with two patterns, which add more colors to your printed models
BulletPoint2 : 【Tips for Excellent Adhesion】Clean and clean again the build plate before printing. And please re-leveling the heat bed if you change the plate.
BulletPoint3 : 【Easy to Disassemble】Please cool the printing plate before removing the model to avoid damaging the plate. Bend the spring steel plate, easy to disassemble without any other tools without damage, release your printing anxiety.
BulletPoint4 : 【Compatible Filaments and Temperatures】We recommend the following filament and temperatures PLA/TPU/PETG/ABS, PLA: 60-65℃; PETG: 70-80℃；ABS：90-100℃ TPU：20-40℃. Please adjust the parameters if you need to print other filaments.
BulletPoint5 : 【Package Included】1 x PEO PET Build Plate for Anycubic Kobra 3, Kobra 3 Combo 3D Printers.
BulletPoint6 : Simple Daily Maintenance:Before printing, you can clean the GECO plate by wiping it with alcohol or using soapy water to remove dust, oil, and fingerprints, and then Select "Textured PEl Plate" and set temperature to plate.
BulletPoint7 : Note:Our "no heating" is the result of testing at room temperature of about 20℃. If your room temperature is very low, please increase the temperature to 20-40℃. If the object you print is a batch of mini object or a large object, it is recommended to add a brim or increase the temperature.
BulletPoint8 : Widely Cpmpatible:It is suitable for Bambu Lab P1P/P1S/X1C/X1/X1E/A1 3D Printer.GECO plate has a beautiful surface texture and a full sci-fi style.The print will not transfer the surface texture,which can keep the bottom ofyour print delicate and uniform with coordinated texture.
BulletPoint9 : Maintain Build Plate:After long-term repeated use, the plate needs to be repaired and cleaned. Set the temperature to 55°C and print the first layer that occupies the entire plateRemove the first layer immediately after printing. This wil restore the plate's adhesion to its original state.
Color : PEO PET (Diamond+Carbon Fiber)
ConnectivityTechnology : USB
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 799924452063
ExternallyAssignedProductIdentifier2 : 0799924452063
GpsrSafetyAttestation : 1
HardwareInterface : usb
IncludedComponents : PEO PET Build Plate
ItemName : IdeaFormer IR3 Smooth Diamond PEO+Carbon Fiber PET Spring Steel Plate for Anycubic Kobra 3, Double Sided Flexible PEO PET Build Plate 256x268mm for Kobra 3, Kobra 3 Combo 3D Printers
ItemPackageDimensions_Height : 31.5976 centimeters
ItemPackageDimensions_Length : 1.6002 centimeters
ItemPackageDimensions_Width : 28.4988 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Bell Tech
MediaSizeMaximum : 200mm x 270mm
MemoryStorageCapacity : 64 MB
ModelName : Qidi X-Plus
ModelNumber : f640705e-ecb9-4f03-a12f-75b9a2026107
ModelSeries : X-Plus
NumberOfBoxes : 1
NumberOfDrivers : 1
NumberOfItems : 1
PartNumber : /
PrinterOutput : Monochrome
PrintMediaType : labels
ProductDescription : Ideaformer Double Sided PEO PET Spring Plate 256x268mm for Anycubic Kobra 3 3D Printer（No Magnetic Base）
ProductSiteLaunchDate : 2024-06-25T05:11:49.300Z
Size : 256x268mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TotalUsbPorts : 1
UnspscCode : 31160000