Cart 2 india

Specification
Brand : BIMYUSR
BulletPoint1 : Zero Heating, Perfect Prints: Designed for low-temperature cold printing, this build plate eliminates warping and saves energy—no heated bed required for PLA, PETG, ABS and TPU. Print flawlessly at room temperature! Recommended printing platform temperature for filaments: PLA/TPU: 10-30℃; PETG/ABS: 50-70℃.
BulletPoint2 : Superior Resin Coating, Achieves Unmatched Adhesion: The surface coating of the platform plate is wear-resistant and scratch-resistant, with a fine matte texture, excellent adhesion to filament.
BulletPoint3 : Double-sided Printing for Free Switching: the build plate provides double-sided resin coating, one board for two purposes, extremely cost-effective.
BulletPoint4 : Ultra-Durable & Long-Lasting: High-strength spring steel plate is used, which has high flatness, good elasticity, no deformation after repeated bending.
BulletPoint5 : Compatible with K1, Ender-3 V3, Ender-3 V3 SE, Ender-3 V3 KE, CR-10 SE, Ender-3 S1, Ender-3 S1 Pro, Ender-3 V2 Neo, Ender-5 S1 (Suitable for the printers with build volume 220x220mm)—just clip it on and start printing. Upgrade your printers with a proven cold plate solution!
ExternallyAssignedProductIdentifier1 : 0094759040325
ExternallyAssignedProductIdentifier2 : 094759040325
IncludedComponents : Build Plate *1
ItemName : Official Low Temperature Cold Printing 3D Printer Platforms Zero Heat Low Energy Double-Sided 3D Printing Build Plate for Creality Ender 3 V3, KE, SE, CR-10 SE, K1, 235x235mm (Build Volume 220*220mm)
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 37 centimeters
ItemPackageDimensions_Width : 35 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : BIMYUSR
ModelName : EVTSCANt5n0w74zxg
ModelNumber : EVTSCANt5n0w74zxg
NumberOfItems : 1
PackageLevel : unit
PartNumber : 094759040325
ProductDescription : The advantage of low temperature printing platform is that the hot bed does not need to be heated to a very high temperature and the printed model can still be firmly adhered to the platform board. Normally, when using PLA to print on PEI board needs to adjust the temperature to 65℃, but this platform board only needs to be adjusted to 30℃, which greatly reduces the power consumption and saves energy. This will be of great significance to users with large quantities of 3d printers.
ProductSiteLaunchDate : 2024-12-03T10:34:30.891Z
Size : 235x235mm(Build Volume 220x220mm)
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 44101700