Cart 2 india

Specification
Brand : Hztyyier
BulletPoint1 : [Improved compatibility] with KOBRA2 maximum compatible, 3 4 maximum. Check the compatibility with the pressure size of your printer.
BulletPoint2 : [PEI powder coating] has a double -sided PEI powder coating with abrasion, scratch , thermal strength of up to 200 °.
BulletPoint3 : [Strong liability] High adhesion properties support various printing materials such as PLA, ABS, TPU, TETG and nylon without additional glue.
BulletPoint4 : [Double functionality] The double -sided PEI plate enables printing on both sides. Just place the heating bed, remove the protective film and start printing.
BulletPoint5 : [Easy to remove] Bend the steel plate for simple model removal. Treat the design for user -friendly handling and convenience.
IncludedComponents : No
ItemName : PEI Magnetic Build Platte Double Sided Printing Strong Adhesion Simple Model Removal for 3 4 Maximum
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 46 centimeters
ItemPackageDimensions_Width : 46 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Hztyyier
Material : Carbon Fiber
ModelName : ZJchaon3ry61chv5
ModelNumber : Hztyyier9hytdovc07
NumberOfItems : 1
PartNumber : Hztyyier9hytdovc07
ProductDescription : 1. [Width compatibility] With a size of 430 x 430 mm, our 3D printer building plate is compatible with Kobra2 maximum and 3 4 maximum. Please pay attention to compatibility with the pressure size of your printer .
2. [Pei powder coating] The flexible building plate has a double-sided Pei powder coating with a matt texture, abrasion and scratch- as well as extremely heat- up to 200 ° C.
3. [Strong liability] This PEI construction interface has excellent adhesive properties to support various printing materials such as PLA, ABS, TPU, TETG and nylon, so that no additional glue is required.
4. [Double-sided pressure] The double-sided PEI plate enables the pressure on both sides. Just place it on the heating bed and pull off the protective film to print directly.
5. [Easy model removal] Our 3D printer construction interface enables easy model removal by simply bending the steel plate. The grip design makes removal easier.

Technical data:
Article type: 3D printer building plate
Material: Pei, spring steel
Size: approx. 430 x 430 mm/16.93 x 16.93 inches
Use: 3D printer
Pei spray thickness: approx. 0.25 mm/0.01 inches
Strength of the spring steel plate: approx. 0.4 mm/0.02 inches
Thicks of the magnetic rubber plate: approx. 1.2 mm/0.05 inches
Total thickness: approx. 2 mm/0.08 inches

List of packages:
1 x 3D printer building plate
1 x magnetic film

A notice:
Excellent liability is achieved when the temperature of the heating bed is about 60 ° C, and you can print directly on each side of the double-sided PEI film without using adhesive or other aids that support the adaptation of the model on the film. At a pressure bed temperature of 60 ° C, you don't have to worry about your printouts. PETG can also be printed well, but the temperature of the hotbed
ProductSiteLaunchDate : 2025-02-25T14:37:21.110Z
Style : Creality K1C Bundle with PLA Filament
UnspscCode : 39121400