Cart 2 india

Specification
Brand : Walfront
BulletPoint : ANYCUBIC 3D Printing Plateform for Photon Mono M7/M7 Pro Resin 3D Printer, Replacement Build Platform
BulletPoint1 : PEI Strong Adhesion: PEI is very good at bonding all kinds of printing wire, especially PLA and ABS, which are printed without warping and have high adhesion to achieve higher printing success rate, exquisite and beautiful.
BulletPoint2 : 3 In 1 Build Plate: This build plate is made of a customized designed PEI material that makes your prints easy to adhere to the print surface, flexible, and removable.
BulletPoint3 : : This spring steel plate is made of spring steel and soft magnetic, which is very and wear resistant.
BulletPoint4 : Easy To Install: The PEI plate is made of excellent stainless steel with a strong magnetic base. The magnetic base is glued to the build plate by peeling off the backing paper and then aligning the plate. The side with PEI is printed upwards. Please remove the protective film from the before printing.
BulletPoint5 : Support Double Sided Printing: This spring steel plate has double sided PEI coating, both sides can be printed, just put it on the heated bed, peel off the protective film and print directly without glue.
BulletPoint6 : Note:For the sake of beautiful texture, we have abandoned the identification code, so if there are words such as foreign objects on the monitor when you print, please ignore it and skip to continue the operation.
CompatibleDevices : Laptop
IncludedComponents : accessory
ItemName : PEI Sheet 200x200mm Magnetic Build Plate Spring Steel Adhesive Flexible Heated Bed 3D Printer Powder Painted Double Sided Textured Steel Print Bed
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 24 centimeters
ItemPackageDimensions_Width : 23 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : WALFRONT
Material : 不锈钢
ModelName : WALFRONTgiwqsyb091
ModelNumber : WALFRONTgiwqsyb091
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : WALFRONTgiwqsyb091
ProductDescription : Spec:
Item Type: Steel Magnetic Build Plate
Size: Approx. 200 x 200mm / 7.9 x 7.9in
Use: 3D Printer
Material: PEI Spraying Powder, Spring Steel, Soft Magnetic
PEI Spraying Thickness: Approx. 0.25mm / 0.01in
Spring Steel Plate Thickness: Approx. 0.4mm / 0.02in
Magnetic Rubber Plate Thickness: Approx. 1.2mm /0.05in
The Overall Thickness: Approx. 2mm / 0.08in

Package List:
1 x Spring Steel Plate
1 x Magnetic Rubber Plate
ProductSiteLaunchDate : 2023-06-10T17:04:33.617Z
Style : K2 Plus
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31000000