Cart 2 india

Specification
Brand : SAHVAIM
BulletPoint1 : No Preheating: Eliminate hot bed preheating! Upgrade GECO Pla Plate/Cold Plate operates at 1℃ or Room temperature for PLA, slashing power use and printing costs. Ideal for stable, low-failure prints（Only for "PLA" filaments）
BulletPoint2 : Instant Room-Temp Adhesion: Achieve perfect first-layer grip no heating (1℃ or room temperature). Beginner-friendly with zero glue/spray. Stays firm even in cold environments
BulletPoint3 : Heavy-Duty Anti-Warping: Our Geco plate is thicker and heavier than ordinary PEI hot beds,Thick and magnetic, it can prevent large prints from warping and small and tall prints from falling over Avoid spaghetti, Flexible double-sided design for tool-free removal + auto bed leveling
BulletPoint4 : Smart Temperature Tips: Select "Textured PEI Plate" at room temperature. Verified no heating at room temperature > 20°C（Heat bed Set 1℃）. For colder rooms (＜20°C), boost to 20-40°C. For batches of small objects or large prints, adding a brim or raising the temperature is advisable
BulletPoint5 : Quick maintenance procedure: Gently bend the heated bed to remove the model. For daily cleaning and maintenance, use alcohol, soap and water. After cleaning the printing platform after long-term repeated use, set the heated bed temperature to 55℃ and heat the build plate to restore the adhesion of the printing platform to its original state. (Do not print during maintenance)
BulletPoint6 : Anycubic Kobra S1 Combo Compatible: Fits 264x276mm printers. Sci-fi textured surface ensures uniform model bottoms hot bed platforms texture pattern does not transfer to the bottom of the print. Durable + aesthetic
BulletPoint7 : Durable and Stable: After multiple tests and verifications, the AD5M build plate can maintain its flatness and adhesion even under high temperature conditions, reducing the frequency of replacement.
Color : H8H(Water Ripples+Silk)
GradeRating : Commercial
IncludedComponents : NO
ItemForm : Sheet
ItemName : Sahvaim GECO Plate Kobra S1 Build Plate for Anycubic 3D Printer Platform,Cold Plate Supertack No Heating for PLA Plate Printing Bed Carbon Plate for Anycubic ACE Pro
ItemPackageDimensions_Height : 28.3972 centimeters
ItemPackageDimensions_Length : 0.9906 centimeters
ItemPackageDimensions_Width : 26.797 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Sahvaim
ModelNumber : AD5MP-PC-SP
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 264x276(GECO PLATE)
ProductDescription : Sahvaim 3D Printer GECO Plate – Inspired by gecko adhesion, this PLA-exclusive cold plate uses Van der Waals force for instant, grip with its frosted texture. No preheating required at 20°C—save energy and costs! Thicker, magnetic design prevents warping and model collapse. Effortlessly remove prints by bending the spring steel plate (self-flattening), and enjoy double-sided use with easy alcohol/soap cleaning. Perfect for Anycubic Kobra S1 Combo (264x276mm). Ideal for beginners: 100% adhesion, no glue/spray, and anti-warp stability. *Note: PLA only. For temps <20°C, adjust to 20-40°C.*
ProductSiteLaunchDate : 2025-04-09T02:31:34.384Z
Size : 264x276mm
SpecificationMet : True
Style : High Temperature PC Plate
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31160000