Cart 2 india

Specification
Brand : Jauarta
BulletPoint1 : MEET TWO PRINTING REQUIREMENTS: Possess both smooth and powder sides, one steel plate can meet two printing requirements
BulletPoint2 : HIGH TEMPERATURE : Good quality magnets can easily withstand temperatures up to 130℃. Very suitable for PETG and ABS materials
BulletPoint3 : SPRING STEEL MATERIAL: Adopt excellent spring steel material, can be bent thousands of times without deformation, very tough
BulletPoint4 : CLEAR PRINT TEXTURE: Come with clear print texture with powder , possess characteristics, very practical
BulletPoint5 : VERY EASY TO USE: This double sided coated bed sheet is very easy to use, the size is 310x310mm, suitable for the same size building board
ItemName : Spring Steel PEI Steel Plate, 310x310mm, 2 Sided, Easy to Use, PETG ABS Material Compatible, with Sticker Gold, Very Practical for 3D Printing
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 34 centimeters
ItemPackageDimensions_Width : 34 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Jauarta
ModelName : Jauartaqv796oksgt
ModelNumber : Jauartaqv796oksgt
NumberOfItems : 1
PartNumber : Jauartaqv796oksgt
ProductDescription : Specification:
Item Type: PEI Steel Sheet
Material: Steel
Print Reference Temperature:
1.PLA: (both sides are fine)
Hot Bed: 50-60℃
Nozzle: 200-210℃
Hot bed 60℃, nozzle 210℃
2. ABS (powder is recommended. After temperature exceeds 80℃, the smooth is easy to foam)
Hot Bed: 70-120℃
Nozzle: 240-250℃
3. PETG: (both sides are fine)
Hot Bed: 60-85℃
Nozzle: 230-245℃
4. Carbon fiber (both sides are fine, very close to PLA, hardened steel is recommended for the nozzle)
Hot Bed: 50-60℃
Nozzle: 200-220℃
5. TPU: (both sides are fine)
Hot Bed: 50-60℃
Nozzle: 200-220℃
Hot bed 60℃, nozzle 220℃
6. Wood (both sides are fine, very close to PLA):
Hot Bed: 50-60℃
Nozzle: 200-220℃

PackageList:
1 x Golden Different Face Steel Plate
1 x Magnetic Sticker B Side + PEI(attached together)

Notice:
1. The steel plate is an elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.
2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the and wear out the sprinklers.
3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gap between the nozzle and the steel plate should be about a piece of A4 paper.
4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.
5. Add a skirt when printing a model with a small
ProductSiteLaunchDate : 2025-01-15T01:50:47.339Z
UnspscCode : 31160000