Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Zimple Ziflex Starter Kit Ultimate Low Temp 232 x 154mm - Magnetic, Flexible Build Plate Kit allows you to easily start a new print without the need for extensive bed preparation.
BulletPoint2 : Maximum heated bed temperature: 70°C
BulletPoint3 : Good adhesion to a variety of materials including PLA, ABS, PETG, TPU, and wood
BulletPoint4 : Uniform heat transmission, the Ziflex Upper surface lasts around 100 prints, depending on printer settings, material, and calibration.
BulletPoint5 : In the Box: (1) Ziflex Magnetic 3M Adhesive Base Layer 232 x 154 (mm) , (1) Ziflex Low Temp Upper Build Plate 232 x 154 (mm)
CareInstructions : Clean with alcohol only, dry after scrubbing. Avoid acidic and alkaline cleaners.
Color : Honeycomb+square
CompatibleDevices : Personal Computer
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial2 : Polyethylene Terephthalate Glycol
CompatibleMaterial3 : Thermoplastic Polyurethane
CompatibleMaterial4 : Wood
CompatibleMaterial5 : Polylactic Acid
CompatiblePhoneModels : Compatible with Brady BradyPrinter M611 M611-AM-BT-W 149569 M611-AM-LAB M611-SFID-KIT1 M611-BC-KIT1 M611-AM-BWSPWID M611-AM-BWSSFID M611AMBTW M611AMLAB M611SFIDKIT1 M611BCKIT1 M611AMBWSPWID M611AMBWSSFID Portable Mobile Bluetooth Label Printer
ConnectivityTechnology : Powerline
ConnectorType : Barrel Connector
ExternallyAssignedProductIdentifier : 3760309570044
GpsrSafetyAttestation : 1
IncludedComponents : SSS 310MM With Magnetic Sticker
InputVoltage : 240 volts_of_alternating_current
ItemName : Zimple Ziflex Starter Kit Ultimate Low Temp - Magnetic, Flexible Build Plate Kit for 3D Printing (210x210)
ItemPackageDimensions_Height : 0.25 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 10 inches
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Zimple
Material : PEI, Steel
Material1 : Acrylonitrile Butadiene Styrene
Material2 : Wood
Material3 : Polylactic Acid
ModelName : YOUTHINKtvysegx56h
ModelNumber : ZX2ULTXXXST
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPorts : 1
OutputCurrent : 3.3 amps
OutputVoltage : 18 volts_of_direct_current
PartNumber : ZX2ULTXXXST
Pattern : Honeycomb+Square
ProductDescription :

Zimple Ziflex Starter Kit Ultimate Low Temp 232 x 154mm - Magnetic, Flexible Build Plate Kit for 3D Printing

Ziflex is a flexible and magnetic 3D printer platform that offers easy removal of prints. Its special coating offers strong adhesion to many materials while ensuring easy removal thanks to its flexibility. Magnetic technology enables correct placement and removal in seconds, without printer decalibration.

With Ziflex, it is no longer necessary to use dangerous tools like (stupid) spatulas to remove your prints. In addition to increased productivity and ease of use, you will no longer risk injuring yourself, damaging your printer or your prints, or decalibrating your printers with a spatula.

Features:

• Maximum heated bed temperature: 70°C
• Good adhesion to PLA, ABS, PETG, TPU, wood and other materials.
• Uniform heat transmission.
• Maximum nozzle temperature: 260°C (depends on your printer calibration)

Ziflex is a magnetic two-layer system and is easy to install:

1. A magnetic plate with 3M adhesive to stick to your original build plate (usually a glass bed).
2. A magnetic plate with a coating that provides strong adhesion to many materials.

ProductSiteLaunchDate : 2023-01-16T19:21:42.537Z
Size : 210x210
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 105.82
UnspscCode : 44103100
WarrantyDescription : No