Cart 2 india

Specification
Brand : Photovolt
BulletPoint1 : Includes titration vessel, sensing electrode, diaphram type generator cartridge, stir bar, injection port assembly, vent dryer tube and pennyhead stopper
BulletPoint2 : Comes with Pump, Waste Trap, Tubing and Stoppers), for Diaphram type generators only
BulletPoint3 : Sold in each
BulletPoint4 : Unit Count Type is Printer Mechanism
BulletPoint5 : Made in :United States
Color : Black
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Stainless Steel
CompatibleMaterial3 : Metal
CompatibleMaterial4 : Fabric
CompatibleMaterial5 : Leather
CompatibleMaterial6 : Wood
ExternallyAssignedProductIdentifier1 : 0708402646757
ExternallyAssignedProductIdentifier2 : 708402646757
ItemName : Photovolt 1291503 Printer Mechanism
ItemPackageDimensions_Height : 9 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printers
Manufacturer : manufacturer
Material1 : Stainless Steel
Material2 : Aluminum
ModelNumber : 1190W38EA
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : 1291503
ProductDescription : Parameters:
Platen size:45*55cm(18*22inch)
Machine size: 180*180*110cm/70*70*43inch
Net weight:104kg/232lb
Gross weight: 106kg/233lb
The functions and features of this machine:
1.The heating tubes adopts 1600w stainless steel heating tubes ,high heating efficiency,it can normally be used for about 10000 hours
2.The size of drying box is 40*40cm;
3.The temperature can be achieved by adjusting the height of the drying box.
4.The drying box can move 10cm from top to bottom.
5.The back of the heating pipe is hot aluminum plate, its thermal efficiency is higher.
6. Prepare for the full set installation tools, test thermometer and installation instructions.
How to use:
1. Move the dryer heating box to the top of the drying platform, turn on the power, start the heating.
2, Place the thermometer probe in the middle of the platform to start temperature measurement;
3.Observe the temperature showed in the thermometer after 15 minutes ;
If the temperature is too high; Adjust the height of the drying box ,if the temperature is too low ,shorten the height of the dryinig box with the platform to achieve the proper temperature .
Test reference data:( following data is just for reference ) Use condition:
Room temperature 24 C(75 F); Work environment without circulation wind;
Bottom of the drying box is 3 cm distant from platform , the temperature is 180c (374 F)
Bottom of the drying box is 5 cm distant from platform , the temperature is 170 c (356F)
Bottom of the drying box is 7 cm distant from platform , the temperature is 160 c (320F)
Items included
1 set of 110V 1600W General Flash Dryer for All Screen Printing Press (006298)
1 set of 4 color 4 station screen press (006526)
ProductSiteLaunchDate : 2016-12-29T06:50:53.886Z
UnitCount : 1
UnspscCode : 44100000