Cart 2 india

Specification
Brand : 3DX
BulletPoint : Made in the USA
BulletPoint1 : This 1.75mm filament run out sensor unit is design for detect whether your printing is run out of filament. During printing if the unit detected that there is out of filament it will send a signal to the main board. With correct firmware settings the printing will paused untill the operator reload the filament and resume the printing.
BulletPoint2 : It works with all available materials;flexible,clear,opaque,filled,etc. The unit can handle as many filaments simultaneously.As soon as one of them will be missing,the unit will send a message to the next one,up to your main board.
BulletPoint3 : Two screws are provided so you can install it where you want. Works with almost any printer.Durable injection modeling casing and industrial grade components.
BulletPoint4 : Package: 1set sensor kit
Color : Red
ExternallyAssignedProductIdentifier1 : 791300410124
ExternallyAssignedProductIdentifier2 : 0791300410124
ItemName : 3DXTECH 3DXMax ASA, 1KG (Red, 1.75mm) 3D Printing Filament
ItemPackageDimensions_Height : 22.8 centimeters
ItemPackageDimensions_Length : 7.9 centimeters
ItemPackageDimensions_Width : 21.1 centimeters
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : 3DXTECH
Material : Acrylonitrile Styrene Acrylate
ModelNumber : ASA1011000BK1
PartNumber : ASA1011000BK1
ProductDescription : 3DXMAX ASA (Acrylonitirle Styrene Acrylate) is a UV-resistant weatherable polymer. Our ASA has a low-gloss matte finish that makes it a perfect filament for technical prints - especially when you don't want the high-gloss surface finish often associated with many other 3D printing materials such as ABS, PETG, or PLA. ASA's UV-stability makes it an ideal material for outdoor applications that will experience intense exposure to the sun and weather. ASA's exceptional mechanical and thermal properties - coupled with excellent UV-stability - is why this resin is used the Auto, Marine, and RV industries for exterior applications such as mirror housings, cowl covers, radiator grills, and sensor housings. Recommended Print Conditions: Extruder Temp: 235 - 255°C Bed Temp: 90-110°C, cool the bed down by about 10-20°C after the first couple of layers Bed Prep: 3DXTech Polyimide Tape, ABS / Acetone Slurry, or Hairspray on clean glass Enclosure: We recommend using a printer with an enclosure to help keep some heat in while printing with ASA Support: Our Aquatek water soluble support works great to create complex parts.
ProductSiteLaunchDate : 2020-01-22T20:36:30.156Z
Size : 1.75mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31150000