Cart 2 india

Specification
Brand : CC3D
BulletPoint1 : New arrival.No polishing need, prints finished by our Silk PLA filament have eye-catching lusterlk Like, Shiny, Glistening), besides it also have a smooth surface.
BulletPoint2 : Feed smoothly and constantly without clogging the nozzle or extruder.
BulletPoint3 : Perfectly compatible with most of the FDM 3D Printer.
BulletPoint4 : Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament.
BulletPoint5 : To achieve a good effect, Recommended Extrusion:205-210℃;Recommended print speed:30-40mm/s; No heating bed requirement in summer, it is best to warm up the hot bed to about 60-70 °C in winter
Color : Silk Dark Purple
ExternallyAssignedProductIdentifier1 : 810168131016
ExternallyAssignedProductIdentifier2 : 0810168131016
GpsrSafetyAttestation : 1
ItemName : CC3D Silk Dark Violet PLA Filament 1.75mm 1KG 2.2LBS Spool - Shiny Metallic Purple PLA for 3D Printing
ItemPackageDimensions_Height : 22.4028 centimeters
ItemPackageDimensions_Length : 8.3058 centimeters
ItemPackageDimensions_Width : 20.701 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : Hangzhou zhuopu new materials technology co.,LTD
Material : Polylactic Acid
Material1 : Carbon Fiber
Material2 : Polyethylene Terephthalate Glycol
ModelNumber : PTG3
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : C002502
ProductDescription : New arrival.


Product description
Specification:
Material: PLA
Brand Name: CC3D
Color: Silk Dark Purple
Net Weight: 2.2 pounds (1kg)
Diameter: 1.75 millimeters
Print Settings and tips:
Printing Temperature: 195-220°C
Hot bed Temperature: 40-60°C
Other Layer Printing Speed: 30-60mm/s,the printing speed of Silk PLA is suggested to be about 30mm / s.
First Layer Printing Speed: 20-25 mm / s.
Retraction:0-5mm
Retraction Speed:<45mm/s
Clean or change the nozzle before printing is good way to reduce jam if it was used for many times.
Possible problems:
Some of 3D printer with Bowden Drive Extruder may have clog problems. The reason is that the softening temperature of silk PLA is lower.
The solution method is:
1.Turn off Retraction settings.
2.It is necessary to clean up the filaments blocked in the throat before printing for second time.
Please Pay Attention:
Retract the filament if you are going leave your printer inactive for somedays.
Store this filament in a dry and sealed bag or box to extend the life of your filament.
When storing the filament, Please pass the loose end through the hole at the edge of the filament reel,this can avoid entanglement. It can be fed correctly and properly when you use it next time.

ProductSiteLaunchDate : 2021-05-19T05:42:29.738Z
Size : 1.75mm
Style : THERMOPLASTIC FILAMENT
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31150000