Cart 2 india

Specification
Brand : Creality
BulletPoint1 : Safer and More Environmentally Friendly: Hyper ABS is made from lower residual monomer materials and is formulated and manufactured to reduce volatiles from thermal decomposition to protect your health
BulletPoint2 : High Speed Hyper ABS & High Compatibility: Our high speed 3d printer filament can achieve print speeds approaching 350MM/S while ensuring excellent print results. Suitable for most FDM 3D printers using 1.75mm filament. High strength filament is widely used in machinery, industry, education, manufacturing, daily life, automotive industry, etc
BulletPoint3 : High Temperature Resistance: 3d printing filament has a heat deflection temperature of 80°C, 25°C higher than ordinary PLA, and can be better used for printing parts in stressful environments
BulletPoint4 : Black Hyper ABS for Diameter Tolerance ± 0.05 mm: Creality Hyper ABS's full mechanically wound and manually inspected to minimize tangling and breakage problems, with a filament diameter of 1.75mm and a tolerance of +/- 0.05mm, which minimizes clogging and stringing. Effectively avoid cracking, warping and other problems, making 3D printing easier
BulletPoint5 : High Impact Resistance: Creality Hyper ABS filament have an impact strength of up to 19kJ/m², which is nearly double the impact strength of ordinary PLA.Its printed models are stronger than PLA's and can be better used for printing Its printed models are stronger than PLA's and can be better used for printing parts in stressful environments
BulletPoint6 : Good Open Printing Environment: 3d printer filament ABS releases less volatile substances during the printing process and supports open printing through the improvement of the formula and production process, , ensuring that you can print with peace of mind
BulletPoint7 : Suggested Printing Parameters: Hyper ABS filament 1.75mm's nozzle printing temperature: 230-270°C, printing platform temperature: 75-95°C, retraction distance: 5mm. Due to the small diameter error, Creality filament has a wide range of compatibility with almost all 1.75mm FDM 3D printers
Color : Black
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial : Nylon
ExternallyAssignedProductIdentifier1 : 198549011486
ExternallyAssignedProductIdentifier2 : 0198549011486
GpsrSafetyAttestation : 1
ItemName : Creality Hyper ABS Filament 1.75mm Black, 3D Printer Filament ABS for High Temperature Resistance, High Impact Resistance, Odorless Non-Toxic 1kg(2.2lb)/Spool, Fits for Most 3D Printers
ItemPackageDimensions_Height : 21.4 centimeters
ItemPackageDimensions_Length : 6.9 centimeters
ItemPackageDimensions_Width : 21.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : Creality
Material : Hyper ABS
Material1 : Resin
Material2 : Silicone
ModelNumber : 3D PLA-1KG1.75-MAG-BLK2
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : 3D-PM-HP-ABS-BK
ProductDescription :

Note:

 

Abrasion of the brass nozzle happens quite often when printing CoPA material. A wear-resistant nozzle, such as hardened steel and ruby nozzle, is highly recommended. 

If this nylon material is used as the support material for itself, please remove the support structure before excessive moisture absorption. Otherwise the support structure can be permanently bonded to the model.

After the printing process, it is recommended to anneal the model in the oven at 70°C for 2 hours.

FAQs:

 

Why can't the filaments stick to the build bed?

 

1. Check the temperature setting before printing, Nylon filaments have higher extrusion temperature than that of PLA or PETG ;

 

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;

 

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

 

4. If the effect is not good, it is recommended to try printing the raft before printing.

 

 

Specification:

Recommended Extrusion/Nozzle Temp: 245°C - 260°C

 

Heated Bed Temp: 25°C - 50°C (77 ℉~ 122℉)

 

Filaments Diameter and Accuracy: 1.75 mm +/- 0.02

 

Filaments Net Weight: 1 kg (2.2 lbs)

 

Recommended Printing Conditions:

 

Cooling Fan: Off

 

Printing Speed: 30~70(mm/s)

 

Raft Separation Distance: 0.1~0.2(mm)

 

Retraction Distance: 3~6 mm

 

Packaging Included:

 

1 × spool of Nylon filament

 

ProductSiteLaunchDate : 2024-06-26T06:28:19.469Z
Style : Blu Nylon Black 1kg and Defiant 15
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31150000
WarrantyDescription : 2 year