Cart 2 india

Specification
Brand : FugaCity
BulletPoint1 : ✅【EASY REMOVAL】Contains PEI Sheet & Magnetic Sticker.Simply Install the PEI Sheet.designed for 3D prints easy removal. Self Release when Cooled Down, and flexible spring steel can be bent to peel off your prints.
BulletPoint2 : ✅【EXCELLENT ADHESION】PEI Coating Textured surface on both side.which performs excellent in print adhesion.Surface Temp Resistant up to 120℃,which could meet 99% filament material needs.
BulletPoint3 : ✅【WIDE APPLICATION】Compatible with Printing Area below 235mm size printers as Creality Ender 3/ Ender 3 Neo/ Ender 3 Pro/Ender 3 V2/ Ender 3 V2 Neo/ Ender3 S1/Ender 3 S1 pro/ Ender 2/ Ender 5/ Ender 5 S1/ Ender 5 Pro/ CR-20/ CR-20 Pro/ ELEGOO Neptune3 (Pro)/ Anycubic Kobra.,etc
BulletPoint4 : ✅【ENHANCE PRINTING EFFECT】Textured PEI coating would make the bottom of your prints show a matte texture and retain the frosted feeling.helps to stick on the bed more firmly.works for most FDM materials in the market, like PLA, PLA+, PETG, ABS, TPU, ASA, Nylon
BulletPoint5 : ✅【MORE PRACTICAL】We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. more durable to handle the tough conditions of 24/7 printing. Wear-Resistant and Scratch-Resistant, easy to clean,also anti-scratch and dustproof
BulletPoint6 : ✅【100% SATISFACTION COMMITMENT】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 90-day money back and 1 YEAR warranty. 100% Satisfaction Guarantee for risk-free shopping!
BulletPoint7 : 【Vacuum-Sealed for Moisture Protection】Dried and packed in 100% vacuum-sealed bags, Inslogic Pre-Dried PLA Pro protects against moisture for optimal print performance.
BulletPoint8 : 【After-Sales Support】Inslogic Pre-Dried offers comprehensive after-sales service and technical support. Contact us anytime with any questions.
Color : 235×235mm Double Textured Golden( With Notches)
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial2 : Plastic
CompatibleMaterial3 : Polylactic Acid
ExternallyAssignedProductIdentifier1 : 741365796176
ExternallyAssignedProductIdentifier2 : 0741365796176
FileFormat : OBJ
GpsrSafetyAttestation : 1
ItemName : Double Side Textured PEI Sheet 235mmx235mm-FugaCity Dual Sided PEI Build Plate with Spring Steel & Magnetic Sticker for Creality Ender 3 /Ender 3 V2 /Ender 3 S1 /Ender 5 3D Printers,Golden Textured
ItemPackageDimensions_Height : 29.3878 centimeters
ItemPackageDimensions_Length : 2.2098 centimeters
ItemPackageDimensions_Width : 27.7876 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Fugacity LLC
Material : PEI
Material1 : Acrylonitrile Butadiene Styrene
Material2 : Polylactic Acid
ModelNumber : PEI-235
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux
PackageLevel : unit
PartNumber : PEI-235
ProductDescription :

Gizmo Dorks metal copper fill filament is a new filament that allows unique prints with a metallic look and finish. Metal copper filament is a unique blend made by combining real copper powder with PLA filament, and the filament prints very similar to normal PLA. The filament can be printed on either heated or non heated build plates. It's suggested to print on blue painters tape, and there is essentially no warping. If a heated build plate is used, then please set it to 60 C, and the print will have an increased adhesion to the platform. Metal copper fill can also be printed on regular glass, glass with glue stick, or kapton tape.

Please be wary of heat creep. PLA already suffers from heat creep and because this filament has real copper powder mixed in, heat creep effects may be accentuated.

Metal copper filled prints can be post processed. Start with using coarse steel wool to polish the surface. Remember this is just a polish and there is not that much pressure needed. Follow it up by applying a thin coat of black spray paint and immediately wiping it off with a cloth. This will leave the places that are harder to reach with a slight black tint giving it a beautiful contrast. Lastly, a copper polish can also be used to give a brighter shine and give some patina.

• Extrusion Temperature: 190 - 225 C
• Heated Bed: Not required but recommended at 60 C
• Diameter: 1.75mm
• Diameter Range: +/- 0.03mm
• Net Weight: 200 grams

Gizmo Dorks has proudly released this filament with a net weight 200 grams. The smaller weight spool allows users to try the filament quality and color before committing to a larger 1 kilogram spool.

ProductSiteLaunchDate : 2023-04-28T17:23:00.584Z
Size : 8.8lbs
StreetDate : 2023-08-08T00:00:01Z
Style : 235 Dual Textured Golden
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31150000
WarrantyDescription : 180D Warranty & Free Return from date purchased