Cart 2 india

Specification
AgeRangeDescription : All Ages
Brand : Gizmo Dorks
BulletPoint1 : High quality acetal 3D printer filament comes vacuum sealed with a desiccant pack
BulletPoint2 : POM filament temperatures - hot end nozzle: 210 - 220 C; bed temperature: 110 C
BulletPoint3 : Acetal printed parts have great strength and low friction, ideal for impact parts or gear wheels
BulletPoint4 : Acetal warps during the print so an enclosed printer (can be simple cardboard over printer) and a heated bed are recommended
BulletPoint5 : Only use in well ventilated areas or ventilated systems
Color : White
ExternallyAssignedProductIdentifier1 : 887503148398
ExternallyAssignedProductIdentifier2 : 0887503148398
FinishType : Painted
IndoorOutdoorUsage : outdoor
ItemForm : Sheet
ItemName : Gizmo Dorks 1.75mm Acetal Delrin Filament POM 1kg / 2.2lbs for 3D Printers, White
ItemPackageDimensions_Height : 7.874 centimeters
ItemPackageDimensions_Length : 21.59 centimeters
ItemPackageDimensions_Width : 21.336 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : Gizmo Dorks
Material : Polyoxymethylene (POM)
ModelNumber : HY-POM-175-NAT
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 300
PartNumber : HY-POM-175-NAT
Pattern : Solid
ProductDescription :

Polyoxymethylene (POM) filament is also known as Acetal or Polyacetal. It is a commonly used thermoplastic to engineer specific parts. Acetal filament has high stiffness, low friction, and excellent wear resistance. It has good elastic resilience and great dimensional stability. The filament has good chemical and heat resistance. Because of it's low friction, POM is routinely used as gear wheels, ball bearings, etc. It has high impact resistance, which is one of the reasons the M16 rifle's stock is made out of POM.

Extrusion Settings - The recommended print temperature is between 210 C - 220 C. Please note that acetal degrades when overheated and may give off small amounts of formaldehyde gas. Do not keep acetal heated above 230 C. Therefore, please always use in a well ventilated area or in a ventilation system.

Print Bed - The hardest part to printing acetal filament is getting the first layer to adhere. POM filament does not typically adhere to conventional 3D print bed surfaces. Some users have found success with blue painters tape with hairspray on top (different blue tapes and hairspray brands have different results). However, POM filament prefers wood or cellulose based platforms. Thicker weight paper such as resume paper or sketch paper can be glued to borosilicate glass with Elmer's glue stick. A heated bed should be used to at least 100 - 110 C.

Special Note - POM filament warps a lot. An enclosed chamber should be used to retain heat for better layer adhesion and reduce delamination issues. Please keep acetal away from moisture and always keep filament in an airtight container with a desiccant.

• Extrusion Temperature: 210 - 220 C
• Heated Bed: 110 C
• Print speeds : 30mm/s
• Diameter: 1.75mm +/- 0.03mm
• Net Weight: 1 kilogram
• Available Colors in 200g Size: Black and White

ProductSiteLaunchDate : 2014-06-25T20:38:42.783Z
RecommendedUsesForProduct : Scrapbook
Reusability : Single Use
Size : PLA
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Wall
TargetAudience : All Ages
UnitCount : 35.27
UnspscCode : 31150000
WaterResistanceLevel : waterproof