Cart 2 india

Specification
Brand : Gizmo Dorks
BulletPoint1 : Recommended Print Temperature: 230 - 260 C
BulletPoint2 : PETG (Polyethylene Terepthalate Glycol-Modified) 3D printer filament vacuumed sealed with desiccant has high toughness with outstanding impact strength with little shrinkage compared to ABS
BulletPoint3 : 1.75mm filament diameter (Dimensional Accuracy of +/- 0.03mm)
BulletPoint4 : Compatible with most 3D printers such as Monoprice Maker Select, Lulzbot, Flash Forge, Creality, and many more.
BulletPoint5 : Print Speed: 50 mm/s or less for best results
Color : Black
ExternallyAssignedProductIdentifier : 8720011031566
ExternallyAssignedProductIdentifier1 : 887503180947
ExternallyAssignedProductIdentifier2 : 0887503180947
ExternallyAssignedProductIdentifier3 : 00887503180947
ItemName : Gizmo Dorks 1.75mm PETG Filament 1kg /2.2lbs for 3D Printers, Black
ItemPackageDimensions_Height : 21.7 centimeters
ItemPackageDimensions_Length : 7.6 centimeters
ItemPackageDimensions_Width : 21.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : Gizmo Dorks
Material : Polyethylene Terephthalate
Material1 : Stainless Steel
Material2 : Polytetrafluoroethylene
ModelNumber : HY-PETG-175-BLK
NumberOfItems : 1
PartNumber : HY-PETG-175-BLK
ProductDescription : The Gizmo Dorks PETG filament is an updated cousin to PET (Polyethylene terephthalate) filament with enhanced properties. PETG has minimal shrinkage and warping. The filament has easy adhesion, so it can be printed on acrylic, glass, polyimide (Kapton) tape, blue tape, and other surfaces. PETG filament has a good combination of strength and flexibility, which is why it is used in latches and mechanical parts for snap fits . The filament is transparent with a glossy finish. It has chemical resistant properties, especially good acidic and alkalic resistance. Large prints tend to have less issues as well due to PETG having a shrink rate of less than 0.004 in/in. Printing Tips: Print speeds should be 50 mm/s or less. The slower the print speed, the more transparent the print will be.

• Extrusion temperature: 230°- 260°C
• Heated Bed Temperature: 80°C
• Print Speed: 50mm/s or less

ProductSiteLaunchDate : 2017-12-08T20:16:05.989Z
Size : 1.75mm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 35.27
UnspscCode : 44103112