Cart 2 india

Specification
Brand : Gizmo Dorks
BulletPoint1 : Made from PLA and recycled wood fibers
BulletPoint2 : Print useful objects with a wood texture and feel
BulletPoint3 : Printed wooden parts can be post processed by sanding or painting
BulletPoint4 : Extrusion temperature range: 210 C - 230 C
BulletPoint5 : Extrusion temperature adjustments will show changes in printed wood color
Color : White
ExternallyAssignedProductIdentifier : 8435532913863
ExternallyAssignedProductIdentifier1 : 887503127065
ExternallyAssignedProductIdentifier2 : 0887503127065
ExternallyAssignedProductIdentifier3 : 00887503127065
GpsrSafetyAttestation : 1
ItemName : Gizmo Dorks 1.75mm Wood Filament 1kg for 3D Printers, Natural
ItemPackageDimensions_Height : 8.128 centimeters
ItemPackageDimensions_Length : 21.082 centimeters
ItemPackageDimensions_Width : 21.844 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : Gizmo Dorks
Material : wood-embedded_plastic
MaximumSize : 7.87 inches
ModelNumber : 8435532913863
NumberOfBoxes : 12
NumberOfItems : 1
PackageLevel : unit
PartNumber : HY-WOOD-175-NAT
ProductDescription :

Gizmo Dorks provides the highest quality 3D printing materials such as ABS, PLA, HIPS, PVA, and more. Our filaments are run with tight tolerances. There are no air bubbles or oily residues. Every filament comes loaded on a durable, hard plastic spool, not a cheap, flimsy cardboard spool.

Wood is a new FDM filament that was developed to print wooden-like objects. The filament contains recycled wood with PLA and some binding polymers. The printed wood will appear rough and similar to Medium Density Fiberboard, known as MDF. Wood filament is less viscous compared to PLA or ABS during printing. Please add a little extra extrusion to the beginning of the print to help prevent dry extrusion. Also, increasing the retraction setting during slicing will reduce "leakage." The wood filament will appear delicate after print, so please allow the wood filament to set approximately thirty to sixty minutes after printing.

Compatible with RepRap, Makerbot, Ultimaker, UP!, Lulzbot, Afinia, Solidoodle, MakerGear, Printrbot LC, and more!

Specifications

• Diameter: 1.75mm
• Net Weight: 1 kg
• Extrusion Temp: 210 C - 230 C
• Heated Bed Temp: 110 C - 120 C
• Layer Height: .2-.25 mm
• Print Surface: Kapton tape or blue tape with glue stick
• Recommended Nozzle Size: 0.5 mm or bigger

ProductSiteLaunchDate : 2014-03-06T20:00:02.450Z
Size : 1.75mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 35.27
UnspscCode : 31150000
WarrantyDescription : 3