Cart 2 india

Specification
Brand : HATCHBOX
BulletPoint1 : FILAMENT SPECS: SIZE: 1 kg (approximately 2. 20 lbs) Spool, 1. 75 mm Filament Diameter (Dimensional Accuracy +/- 0. 03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 180°C - 210°C (356°F - 410°F)
BulletPoint2 : NATURAL STONE LOOK FROM A PLA FILAMENT: Get realistic-looking stone right out of your printer with the new Magic Stone filament from HATCHBOX; Design complex, medieval castles and replicas of historic art sculptures with a texture that mimics from granite, limestone and marble
BulletPoint3 : BEGINNER & EXPERT FRIENDLY: HATCHBOX 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings; Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues
BulletPoint4 : TOP QUALITY 3D PRINTING: Clog, bubble and tangle-free! HATCHBOX PLA is formulated to offer minimal warping and little to no odor without the use of a heated bed; PLA is vacuum-sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution
BulletPoint5 : WHY HATCHBOX? We’re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price; From art and design, to prototypes and models, HATCHBOX is trusted to deliver the best in 3D printing technology
Color : Black
CompatibleDevices1 : Laptop
CompatibleDevices2 : Smartphone
CompatibleMaterial : Nylon
ExternallyAssignedProductIdentifier1 : 849344067290
ExternallyAssignedProductIdentifier2 : 0849344067290
GpsrSafetyAttestation : 1
ItemName : HATCHBOX Magic Stone PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black
ItemPackageDimensions_Height : 22.3012 centimeters
ItemPackageDimensions_Length : 7.2898 centimeters
ItemPackageDimensions_Width : 21.6916 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : HATCHBOX
Material : Polylactic Acid
Material1 : Resin
Material2 : Silicone
ModelNumber : 3D PLA-1KG1.75-MAG-BLK2
NumberOfBoxes : 1
NumberOfItems : 1
OperatingSystem : Linux
PartNumber : 3D PLA-1KG1.75-MAG-BLK2
ProductDescription :

Note:

 

Abrasion of the brass nozzle happens quite often when printing CoPA material. A wear-resistant nozzle, such as hardened steel and ruby nozzle, is highly recommended. 

If this nylon material is used as the support material for itself, please remove the support structure before excessive moisture absorption. Otherwise the support structure can be permanently bonded to the model.

After the printing process, it is recommended to anneal the model in the oven at 70°C for 2 hours.

FAQs:

 

Why can't the filaments stick to the build bed?

 

1. Check the temperature setting before printing, Nylon filaments have higher extrusion temperature than that of PLA or PETG ;

 

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;

 

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

 

4. If the effect is not good, it is recommended to try printing the raft before printing.

 

 

Specification:

Recommended Extrusion/Nozzle Temp: 245°C - 260°C

 

Heated Bed Temp: 25°C - 50°C (77 ℉~ 122℉)

 

Filaments Diameter and Accuracy: 1.75 mm +/- 0.02

 

Filaments Net Weight: 1 kg (2.2 lbs)

 

Recommended Printing Conditions:

 

Cooling Fan: Off

 

Printing Speed: 30~70(mm/s)

 

Raft Separation Distance: 0.1~0.2(mm)

 

Retraction Distance: 3~6 mm

 

Packaging Included:

 

1 × spool of Nylon filament

 

ProductSiteLaunchDate : 2019-11-15T18:20:36.196Z
Style : Blu Nylon Black 1kg and Defiant 15
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 35.27
UnspscCode : 31150000
WarrantyDescription : 2 year