Cart 2 india

Specification
Brand : LEE FUNG
BulletPoint1 : Bright and smooth surface - This filament has strong toughness and uniform in color
BulletPoint2 : Environmental Friendly Material - Made of TPU (Thermoplastic Polyurethane), this material is toxic-free and harmless to human
BulletPoint3 : High Purity - low shrinkage rate, can be used in priting any size of models without warping
BulletPoint4 : 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 374°F - 446°F(190-230°C), Spool Diameter: 7.87inch, Spool Height: 2.83inch
BulletPoint5 : Suitable for many occasions - like factory, lab, for business use. Test Report: MSDS,FDA, ROHS,EN71-19,17PHTHALATE,REACH
Color : Black
Department : unisex-adult
ExternallyAssignedProductIdentifier : 3295374364408
ExternallyAssignedProductIdentifier1 : 711221152927
ExternallyAssignedProductIdentifier2 : 0711221152927
ItemName : LEE FUNG TPU 3D Printer Filament 1.75mm,1kg (2.2lbs) Spool, Dimensional Accuracy +/- 0.05 mm Black
ItemPackageDimensions_Height : 21.082 centimeters
ItemPackageDimensions_Length : 6.858 centimeters
ItemPackageDimensions_Width : 20.32 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : LEE FUNG
Material : Thermoplastic Polyurethane
ModelName : LUISAS
ModelNumber : A11884-TPU-B1KG
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : A11884-TPU-B1KG
ProductDescription : Perfect for DIY lovers to design christmas or birthday gifts to your children, families, friends, and lovers, also good for business use to design a model

SPECIFICATION:

- Filament Material: TPU (Thermoplastic Polyurethane)
- Net Weight: About 2.20 lb (1kg)
- Shipping Weight: About 2.98 lb (1.35kg)
- Filament Diameter: 1.75mm (±0.05mm)
- Recommended extruder temperature: 446°F - 480°F(230-250°C)
- Spool Type: Plastic Spool
- Spool Diameter: About 7.87 inch (20cm)
- Spool Width: About 2.28 inch (5.8cm)
- Spool Height: 2.76 inch (7cm)
- Spool Hub Hole: About 2.09 inch (5.3cm)
- Test Report: MSDS,FDA, ROHS,EN71-19,17PHTHALATE,REACH
- Package Type: Vacuum package

PRINTING TIPS:
Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.
With bowden extruder you might pay more attention to these tips:

- Print slow 15-30 mm/s Printing speed
- First layer settings. (Height 100% Width 150% speed 50% e.g.)
- Retraction disabled. This would reduce messy, stringing or oozing printing result.
- Increase Multiplier(Optional). set to 1.1 would help the filament bond well. - Cooling fan on after first layer.
If you are having problems printing with soft filaments, firstly, and most importantly, slow the print down, run at 20mm/s will work perfectly.

It is important when loading the filament to allow it to only just start extruding. Once you see the filament coming out the nozzle hit stop. The load feature pushes filament through quicker than a normal print and this can cause it to get caught in the extruder gear.

Also feed the filament direct to the extruder, not through the feeder tube. This reduces the drag on the filament which can cause the gear to slip on the filament.
ProductSiteLaunchDate : 2018-02-02T08:00:00.000Z
Size : Black
StreetDate : 2023-07-21T00:00:01Z
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 44103100
WarrantyDescription : 1 year