Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : ohhnac
BulletPoint1 : Efficient Moisture-Proofing and Protection of Consumables: Sealed design with built-in desiccant effectively absorbs moisture and prevents PLA, ABS, PETG and other consumables from moisture, ensuring stable print quality and avoiding problems such as bubbles and drawing.
BulletPoint2 : Precise Control of Drying Environment: real-time display of humidity and temperature inside the drying box, helping you to keep track of the drying status at any time, the temperature is 40°~50°C. If you use the filament dryer box in a room with a room temperature below 16°C, the temperature inside the drying box won't reach 50°C. Don't worry, but this will not affect the drying effect, ensuring that it operates in the optimal drying temperature required by different materials.
BulletPoint3 : Capacity Design: The filament storage box is well-designed, can easily hold 0.5KG or 1KG filament rolls, the drying box adopts transparent structure design, you can know the environment inside the box at any time, to ensure that the consumables are always in an optimal dry state, to avoid printing problems caused by moisture, such as air bubbles, pulling, or poor interlayer adhesion.
BulletPoint4 : Lnstallation Operation: 1- install the electronic humidity thermometer on the battery, 2- put the desiccant, 3- put the fixed tube into the filament hole, 4- hold up both sides of the drying box by hand, hold up and put the filament in at the same time (aligned with the slot to fix it) 5- cover the lid to pull out the filament (pay attention to the direction of the filament)
BulletPoint5 : Sealing Effect: filament dry box is made of high quality rubber sealing tape, which can store the filament for a long time without electricity, protect the filament from moisture and dust, and improve the drying efficiency and quality.
Color : Spiderman Color- Black, White, Red, Cobalt Blue
ExternallyAssignedProductIdentifier1 : 816550029411
ExternallyAssignedProductIdentifier2 : 0816550029411
ItemName : ohhnac 3D Printing Filament Dryer Box - Dryer Box for Continuous Filament Storage Sealing,Keeping Dry During 3D Printing Compatible with 1KG PA Nylon, PETG,PLA 1.75mm 2.85mm
ItemPackageDimensions_Height : 29.6 centimeters
ItemPackageDimensions_Length : 11.5 centimeters
ItemPackageDimensions_Width : 26.5 centimeters
ItemTypeKeyword : filament-3d-printing-materials
Manufacturer : ohhnac
Material : Polylactic Acid
ModelNumber : ASA3010500BK0
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : BOX
ProductDescription : ohhnac 3D Printing Filament Dryer Box
ProductSiteLaunchDate : 2024-11-20T13:58:48.830Z
Size : 500g X 4 Spools
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 17.637
UnspscCode : 31150000
WarrantyDescription : NO