Cart 2 india

Specification
Brand : SAHVAIM
BulletPoint1 : 【 Important Notice 】 Using desiccants can effectively reduce the humidity of 3D printing filaments, with each package weighing approximately 23g. It should be clarified that desiccants are only used to prevent filaments from getting damp and cannot restore the dried state of already damp filam
BulletPoint2 : 【Timing of Replacement 】 The new desiccant appears as a white powder and gradually turns yellow as the water absorption increases. Once the entire desiccant package turns completely yellow, it loses its dehumidification function and needs to be replaced immediately. It is recommended to re dry the consumables at this time.
BulletPoint3 : 【 User Guide 】Take out 2-3 packs of new desiccant and tear off the outer plastic film.Fold the desiccant in half, easily place it into the reserved hole of AMS (Automatic Material Station), and cover it with a lid.Ensure that the AMS cover is tightly sealed, use a locking mechanism to isolate external air, and ensure that consumables are stored dry.
BulletPoint4 : 【The Importance of Desiccant】Moist filaments can weaken interlayer adhesion, directly affecting printing quality, increasing the risk of printing blockage, making it difficult to firmly adhere to the hot bed, and causing printing failure.The use of desiccants can effectively prevent the above problems, ensure smooth and unobstructed printing process, save valuable time, and improve printing satisfaction.
BulletPoint5 : 【Widely applicable】These desiccants are not only suitable for Bambu Lab 3D printers, but also for all 3D printing users who use filaments.Wet filaments are prone to brittle breakage and printing problems; Meanwhile, uneven extrusion of silk material can also affect the printing effect. Therefore, keeping filaments dry is crucial, as drying filaments will significantly improve printing quality.
BulletPoint6 : Controlling the moisture content of the PETG material is critical for 3D printing because the PETG molecular structure automatically tends to dehydrate even when the vacuum package is not opened. Drying temperature 70, lack of equipment can be exposed to the sun exposure for 4 hours.
BulletPoint7 : 100% satisfy warranty: within 24 hours reply,100% satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you.
Color : Magic Blue
ExternallyAssignedProductIdentifier1 : 0742404902145
ExternallyAssignedProductIdentifier2 : 742404902145
GpsrSafetyAttestation : 1
ItemName : Sahvaim 3D Printer Bambu Lab AMS Filament Desiccant for Bambu Lab P1S P1P X1 X1C AMS,3D Printer Accessories PETG PLA ABS TPU Filament Drying,Bambu Lab AMS Desiccant Keep Filament Dry.
ItemPackageDimensions_Height : 0.59 inches
ItemPackageDimensions_Length : 6.3 inches
ItemPackageDimensions_Width : 5.9 inches
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : Sahvaim
Material : Polylactic Acid
ModelNumber : XKS
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : bambu lab 3d printer AMS Desiccant
ProductDescription : Sahvaim 3D Printer Bambu Lab AMS Filament Desiccant for Bambu Lab P1S P1P X1 X1C AMS,3D Printer Accessories PETG PLA ABS TPU Filament Drying,Bambu Lab AMS Desiccant Keep Filament Dry.
ProductSiteLaunchDate : 2024-07-10T11:03:26.231Z
Size : 1M/39INCH
StreetDate : 2017-05-15T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 24141500
WarrantyDescription : 90DAYS