Cart 2 india

Specification
Brand : NDNCZDHC
BulletPoint1 : HIGH EFFICIENCY: The resin has good fluidity, can effectively improve the printing speed and success rate, and the strength is enough to withstand accidental drop.
BulletPoint2 : EASY TO CLEAN: The 3d printer resin has very little smell during 3D printing, after printing, only use an airgun and spray to clean it, so as to avoid sticking to the pan after printing.
BulletPoint3 : FOR 3D PRINTING: This UV resin has volume shrinkage during curing, which brings glossy surface and high resolution to the printed model, is a good tool for 3D printing.
BulletPoint4 : GOOD COMPATIBILITY: The rigid resin is suitable for DLP LCD 3D printers, which has good compatibility, and supports 8K, especially for small and half length models.
BulletPoint5 : WIDE APPLICATION: The 3d printing resin has a wide range of applications, with a capacity of 1000ml, used in desktop models or industrial parts, convenient and practical.
Color : Blue
ExternallyAssignedProductIdentifier1 : 786468851681
ExternallyAssignedProductIdentifier2 : 0786468851681
ExternallyAssignedProductIdentifier3 : 06937120310600
ItemName : 3D Printer Resin, 1000ml Photosensitive Resin, 405nm UV-Curing Resin with Quick Curing and Excellent Fluidity for DLP LCD 3D Printer(White)
ItemPackageDimensions_Height : 32.9 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 26.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : liquid-3d-printing-materials
Manufacturer : NDNCZDHC
Material : Polylactic Acid
ModelNumber : PLA BLUE
NumberOfBoxes : 1
PartNumber : NDNCZDHCeynh3cp9qz-12
ProductDescription : Specification:
Item Type: 3D Printing Resin
Capacity: 1000ml
Applicable Light Source Wavelength: 365-405nm
Underlayer Exposure Time: 20-30S
Bottom Layers: 6 layers
Regular Exposure Time: 1.5-3S
Density: 1.10-1.12g/cm³
Viscosity: 260-350mPa·s (at 25℃)
Bending Strength: 47-50Mpa
Tensile Strength: 48-54Mpa
Hot Deformation Temperature: 85℃
Glass Transition Temperature: 100℃
Shore Hardness: 82D
Fracture Elongation: 8%-12%
Note:
1. The ambient temperature is 20-30 ℃. Do not print in the window or other environment exposed to ultraviolet light and try to isolate children and pregnant women.
2. Shake the resin for one to two minutes before use to prevent the components from settling.
3. It is recommended to wear nitrile gloves and protective mask when using, and keep indoor ventilation. Those who are allergic to acrylic acid should be cautious.
4. The residual liquid on the surface of the printed resin parts should be cleaned, and the cleaning process should not exceed 1 minute. If the cleaning time is too long, the structural performance of the resin parts will become worse.
5. Where the pores and other details are not easy to clean, ultrasonic or syringe and other auxiliary tools can be used for cleaning, and it is not advisable to clean the model too many times. The cleaning model with impure detergent will lead to whitening and unclean washing. The specific cleaning time shall be subject to the effect that there is no viscosity on the surface of the resin part and no residual resin in the pores.



Package List: 1 x Resin
ProductSiteLaunchDate : 2023-08-29T10:53:50.158Z
Size : pla
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 35.27
UnspscCode : 44103100