Cart 2 india

Specification
Brand : ELEGOO
BulletPoint1 : 【Easy to Clean and Odorless Washing】 The washable formula only requires rinsing with clean water and does not require cleaning with alcohol or IPA, achieving a clean and odor-free cleaning process and enhancing the overall printing experience.
BulletPoint2 : 【Excellent Print Quality】 ELEGOO Water washable resin delivers exceptional print quality and produces prints with smooth surfaces, fine details, and sharp edges resulting in professional looking results every time.
BulletPoint3 : 【Versatile Applications】 ELEGOO Water Washable 3D printer Resin is suitable for a wide range of applications, Whether you printing prototypes, figures, jewelry, or mechanical parts, this resin can handle it all.
BulletPoint4 : 【Wide Compatibility】 ELEGOO Water Washable Resin is compatible with ELEGOO and other brand resin 3d printers. and its ability to produce high-quality prints make its versatile choice for makers, designers, and hobbyists alike.
BulletPoint5 : 【Surroundings Friendly】 By eliminating the need for alcohol solvents, it reduces the environmental impact associated with traditional resin printing methods, achieving sustainable development for people and nature.
Color : Ceramic Grey
ExternallyAssignedProductIdentifier : 6976021762354
IncludedComponents : 3D Printer Resin
ItemDisplayWeight : 1 kilograms
ItemName : ELEGOO Water Washable 3D Printer Resin 2.0, Fast Curing Photopolymer Resin for Mars Saturn Jupiter MSLA DLP LCD 3D Printing, 385-405nm UV Curing 3D Printing Liquid, Ceramic Grey 1000g
ItemPackageDimensions_Height : 22.1996 centimeters
ItemPackageDimensions_Length : 9.906 centimeters
ItemPackageDimensions_Width : 9.906 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : liquid-3d-printing-materials
Manufacturer : ELEGOO
Material : Resin
ModelNumber : AU-EL-3D-W91
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : AU-EL-3D-W91
ProductDescription : ELEGOO Water Washable 3D Printer Resin 2.0
Parameters:
Elongation at break: 20.5%
Tensile strength: 25.249 mPa
Maximum load: 1210.974 N
Flexural modulus: 962.164 mPa
The upgrades of version 2.0 compared with version 1.0:
1. High performance: performance upgrade, more cost performance;
2. Low viscosity: viscosity is reduced by about 76%, the success rate is higher, and the stability is stronger;
3. Resin stability: the resin liquid is not easy to be stratified on the surface when printing or standing, and the liquid stability is stronger;
4. Performance parameters: Elongation at break is increased by about 25%, maximum load is increased by about 28%, and tensile strength is increased by about 25%. While ensuring the strength of the material, it has better toughness and better overall performance;
5. Cleaning effect: Use clean water to rinse, the model surface cleaning effect is good and it is not sticky.

ProductSiteLaunchDate : 2024-05-09T11:27:30.936Z
Size : M-1000g
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31150000