Cart 2 india

Specification
Brand : FORM FUTURA
BulletPoint1 : Almost no odour� -�Compared to other resins on the market our Platinum LCD resin is relatively odour-free!/UV & weather resistant
BulletPoint2 : Fast printing with short curing times/High-resolution 3D printing with fine detail
BulletPoint3 : Vivid colors with an extremely high level of colorfastness/Excellent dimensional accuracy and low shrinkage
BulletPoint4 : Low water absorption
BulletPoint5 : Compatible with all open source LCD and DLP in the range of 385 - 420nm
Color : Translucent Blue
ExternallyAssignedProductIdentifier : 8719956550058
ExternallyAssignedProductIdentifier1 : 0793169567421
ExternallyAssignedProductIdentifier2 : 793169567421
ItemName : [RT]Diameter=2.85mm,[CS]Color=Black:#090a09,[RT]Weight=500 gms
ItemPackageDimensions_Height : 11 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 19 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : liquid-3d-printing-materials
ItemVolume : 0.000385 cubic_meters
Manufacturer : FormFutura
Material : Thermoplastic Elastomers
ModelNumber : 285ATL2045-BLCK-0500
NumberOfItems : 1
PackageLevel : unit
PartNumber : 285ATL2045-BLCK-0500
ProductDescription :

Arnitel® ID2045 is a highly flexible TPC (thermoplastic copolyester) that can be used in a broad range of applications from sports mouth guards to electronics. It is a flexible polymer with very good UV- and chemical-resistance compared to other flexible polymers such as TPU (thermoplastic urethane). 
Arnitel® ID2045 is an ECO label filament made with 50% bio-based feedstock. It brings speed to your 3D printing production – it loads onto the machine and prints twice as fast as other TPCs. It combines this easy and fast printing with high performance characteristics enabled by excellent inter-layer adhesion due to its slower crystallization behavior.

Possible applications

• Automotive, Aerospace, Railway, Motorsports – e.g. lighting frames, tubes, wipers
• Flexible tools and electronics
• Healthcare – such as prosthetics, bruxism splints
• Sports & Lifestyles – e.g. shoe midsoles, mouth guards, shin guards, glasses, earbuds, smart watches, jewelry

General printing guidelines

Nozzle size: ≥ 0.25mmLayer height: > 0.1mm *Flow rate: ± 100%Print temp: ± 220 - 245° C *Print speed: Low / Medium *Retraction: NoHeat bed: ± 40 - 60° C *Fan speed: 0%Printing surface: Glass + DimaFix / PET tapeEnclosed printer needed: PreferredHeated Build Chamber: NoExperience level: Intermediate

• Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment ou
  ProductSiteLaunchDate : 2020-06-15T00:00:01Z
  SafetyDataSheetUrl : https://www.emsdiasum.com/microscopy/technical/msds/1233-A.pdf
  Size : EA
  Style : EMSFix
  UnitCount : 17.64
  UnspscCode : 31150000