Cart 2 india

Specification
Brand : TECBEARS
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
BulletPoint6 :
Color : 1000g Dark Grey
ItemName : TECBEARS 3D Printer Resin 1KG,405nm UV Curing Standard Resin, Fast Curing 3D Printing Liquid for LCD DLP SLA 3D Printers, Low Shrinkage, High Precision, 1000g, Dark Grey
ItemPackageDimensions_Height : 23.5966 centimeters
ItemPackageDimensions_Length : 7.112 centimeters
ItemPackageDimensions_Width : 14.8082 centimeters
ItemTypeKeyword : liquid-3d-printing-materials
Manufacturer : TECBEARS
Material : Photopolymer Resin
NumberOfBoxes : 5
NumberOfItems : 1
PartNumber : RESIN-ST-DG-1KG-TB
ProductDescription :

TECBEARS 3D Printer Resin, 405nm UV Standard Fast Curing Photopolymer Resin for 2K/4K/6K/8K LCD DLP SLA 3D Printer, TECBEARS Standard Resin go-to choice for all your UV curing needs. With low shrinkage and high precision, this resin ensures your prints come out just right. Its fast curing time and great stability make it a top pick for efficiency and reliability. Plus, the bright and stunning colors will bring your creations to life. 

★Packing Listing

Standard Fast Curing Photopolymer Resin

Disposable funnel

Disposable gloves

★Resin Storage Methods

Please store away from sunlight, as sunlight contains ultraviolet rays which will cure the photosensitive resin.

It is recommended to store the resin in a cool dry place at 15-35°C. Resin viscosity will become higher when the temperature gets lower.

Please keep it sealed to avoid dust or moisture affecting the print quality.

★Matters Needing Attention

Usage period: use within one year for best results.

This product is not edible, if swallowed by mistake, please seek medical attention immediately.

Do not use resin in places exposed to sunlight.

Please shake well before use, it is recommended to shake upside down for three times.

Wear gloves, protective masks and other protective equipment when using photosensitive resin.

Please clean the printed resin model with high-concentration alcohol for about 30S. 

It is recommended to use 95% concentration of alcohol or TECBEARS 3D Printer Resin Detergent to clean the printed model.

In order to obtain better results, the cleaned(alcohol has dried) model can be secondarily cured. 

Do not pour resin from the container into the unused resin.

Do not leave the resin in the container for a long time without using it, to prevent the resin from being contaminated.

ProductSiteLaunchDate : 2024-01-16T05:40:30.327Z
Size : 1KG
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31150000