Cart 2 india

Specification
AgeRangeDescription : adult
Brand : CDZHLTG
BulletPoint1 : 1. Compact structure and compact shape
BulletPoint2 : 2. Aluminum alloy shell, solid and reliable
BulletPoint3 : 3. Stable performance
BulletPoint4 : 4. Voltage: 24V
BulletPoint5 : 5. Power: 4W
Color : Green+White
Department : unisex-adult
ExternallyAssignedProductIdentifier : 7649657330493
ExternallyAssignedProductIdentifier1 : 739750281871
ExternallyAssignedProductIdentifier2 : 0739750281871
IncludedComponents : switch
ItemName : CDZHLTG 24V Rotary Paddle Level Sensor Level Switch High Temperature Resistance Threaded Type Fit Powder Bin Detect Control Switch
ItemPackageDimensions_Height : 10 centimeters
ItemPackageDimensions_Length : 25 centimeters
ItemPackageDimensions_Width : 14 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : acceleration-sensors
Manufacturer : CDZHLTG
Material : Aluminum
ModelName : LHAOEEEYG
ModelNumber : Does not apply
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CDZHLTG665955644465665
ProductDescription : Specification:
Voltage: 24V
Power: 4W
Blade speed: 1r.p.m
Measuring torque: 1.0 Nm
Working temperature: - 20 ~ 80 ℃
Applicable specific gravity: 0.5g/cm³

Note:
For horizontal installation, it is recommended to install the switch horizontally and downward at an angle of 15-20° to reduce the impact of materials.
The wire inlet of the junction box must face down, and the fixing nut of the electric bolt must be locked.
Confirm that the voltage used is correct during power transmission.
The load of the controlled line must match with the switch contact plate
The bridge breaker or vibration motor should be avoided near the product installation,.
The switch should not be installed close to the feed inlet to reduce blade damage and misoperation. If the switch must be installed near the feed inlet, a 2" wide protective baffle should be installed 200 mm above the switch.
Horizontal installation and vertical installation shall be selected according to different models.
When the shaft length adjustable type switch is disassembled and installed on site, when the universal joint is connected with the transmission shaft, the locking nut must be coated with glue, and then locked with a wrench.
The warning of open the cover after cutting off the power supply must be followed in the field installation.
There shall be no toxic gas corrosive to aluminum alloy at the installation site.
The maximum temperature of the tested medium shall not exceed the temperature indicated in the product label.

Package Included:
1×Switch
ProductSiteLaunchDate : 2025-05-19T08:20:48.303Z
Size : 25x14x10cm
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 358 volts