Cart 2 india

Specification
Brand : HNGJULI
BulletPoint1 : 【 Card type 】 EM-ID card, MI-IC card (does not support HID, Cobra, APCiK, etc.)
BulletPoint2 : 【 Baud rate 】Communication baud rate 9600.N.8.1
BulletPoint3 : 【 Way of opening 】Card verification, password verification, password + card verification, millions of times of card reading test, stable performance
BulletPoint4 : 【 Communication format 】Wiegand 26or34, RS232, RS485, UART TTL and other communication specifications meet your needs
BulletPoint5 : 【 Wiegand switching 】Just shorten or dangle the WG line to ground. Wiegand 26 or 34 switching can be realized
BulletPoint6 : 【 Doorbell button 】One-key call for visitors, convenient and fast, suitable for various access control installations.
CompatibleDevices : Alarm
ExternallyAssignedProductIdentifier1 : 0765483366226
ExternallyAssignedProductIdentifier2 : 765483366226
IncludedComponents : User manual
ItemName : HNGJULI 125KHZ EMID Access Control Keypads, Proximity M1 Card RFID Card Reader, can Receive Doorbell, Supports Wiegand 26/34, RS232, RS485, UART TTL Format (HGL-014, IC Card, RS485 Format)
ItemPackageQuantity : 1
ItemTypeKeyword : access-control-keypads
Manufacturer : HEYGLI
Material : Acrylonitrile Butadiene Styrene (ABS)
ModelName : Command Secondary Color
ModelNumber : HGL-014
NumberOfItems : 1600
PartNumber : RS485 Format
ProductDescription : Product parameters
Product Name：Swipe Password Access Control Card Reader
Operating Frequency：125Khz , 13.56Mhz
Sensing distance：0-15CM
Support cards：TK4001/ EM4100 etc.
Ways of identifying：swipe card, password
Operating voltage：DC 9V - 16V
Working current：<40mA
Card reading speed：<0.2S
Operating temperature：-30℃~85℃
Output format：RS485，RS232，UART TTL，Wiegand 26/34
Transmission distance：RS232 (10 meters), RS485 (1200 meters), WG (100 meters)
Shell material：Using PVC, ABS fire retardant material
Note
Please notice that this reader can't read encrypted cards, such as HID, Cobra, APCiK etc. Support reading EMID cards or IC cards.
Can't work alone, Normally work with Control board/Fingerprint devcie/Master controller to build completely Security Access Control System.
Installation instructions
1.Stick the sticker inside the card reader box to the location where you want to install the card reader, open two positioning holes and one middle outlet hole according to the marked position, and plug the positioning holes with rubber plugs (Note: If installed on the wall, 86 installation boxes need to be embedded for concealed installation.)
2. Use a cross screwdriver to unscrew the screws that fix the panel and bottom plate, remove the bottom plate, and use the screws to fix the bottom plate to the wall on the control entrance and exit side
3. Thread the wire of the card reader through the outlet hole, connect the wire according to the instructions, and then fix the screws on the card reader panel and bottom plate.
ProductSiteLaunchDate : 2024-07-10T16:08:04.495Z
Reusability : True
Style : IC Card
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26000000
Voltage : 3.8 volts
WarrantyDescription : 1