Cart 2 india

Specification
Brand : SHATUOA
BulletPoint1 : 【Ergonomically Designed】Compared with the traditional one, this cylinder liner puller is ergonomically designed with a press rod, which is more labor-saving and facilitates your use during operation.
BulletPoint2 : 【High Efficiency】It has a maximum pulling force of 15T, even the ultra-thin wall can also be easily pulled out.
BulletPoint3 : 【High Durability】This cylinder liner puller is made of #45 steel which has good wear resistance, so it is more durable and can be used for a long time.
BulletPoint4 : 【Easy to Install】You can easily install it without much effort and time because of its simple structure.
BulletPoint5 : 【Application】It is used for the disassembly of the internal combustion engine and cylinder liner. It is suitable for any model with the inner diameter of the cylinder liner between 80-135mm.
Color : White
ExternallyAssignedProductIdentifier1 : 0769092593844
ExternallyAssignedProductIdentifier2 : 769092593844
FitType : Vehicle Specific
IncludedComponents : 1* Cylinder Puller and Other Accessories for Use
ItemName : 15T Hydraulic Cylinder Liner Puller, Universal Hydraulic Cylinder Puller Wet and Dry Cylinder fit for Diameter 80-140mm Cylinders Engine, Hydraulic Cylinder Sleeve Liner Puller Tool for Auto Repair
ItemPackageDimensions_Height : 13 centimeters
ItemPackageDimensions_Length : 83 centimeters
ItemPackageDimensions_Width : 20 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-cylinder-accessories
Manufacturer : SHATUOA
ModelNumber : Model-DFC589-Gl29379
NumberOfItems : 1
PartNumber : Cylinder Puller
ProductDescription :

Description

This cylinder liner puller is made of #45 steel which has good wear resistance, so it is more durable and can be used for a long time. Compared with the traditional one, this cylinder liner puller is ergonomically designed with a press rod, which is more labor-saving and facilitates your use during operation.

Details

#45 Steel Material: This cylinder liner puller is made of #45 steel which has good wear resistance, so it is more durable and can be used for a long time.

Adjustable Cylinder Diameter: There is a screw at the bottom of the cylinder liner puller used to adjust the cylinder diameter, so you can adjust it according to your own needs.

Specification

Max. Pulling Force: 15T

Material: #45 Steel

Maximum Stroke (Piston Push Rod): 5cm/1.97in

Weight: 18kg/39.68lbs

Package Included

1* Cylinder Puller

Other Accessories for Use

Notes

The extension of the cylinder push rod must not exceed 50mm.

How to Use

1. According to the model you need to disassemble, choose the pull plate and connecting rod (the connecting rod is divided into two lengths).

2. Connect the connecting rod with the cylinder lifter, the steering knuckle and the pull plate.

3. Twist the steering knuckle of the cylinder puller to a right angle with the connecting rod. The straight side of the pull plate is parallel to the connecting rod and passes through the cylinder liner so that the small diameter of the pull plate is locked into the inner diameter of the cylinder liner.

4. Sleeve the two support tubes onto the diagonal cylinder head screws.

5. Pass the beam of the cylinder puller into the slideway of the lifting gear, and put both ends of the beam into the groove of the support tube.

6. Screw the hydraulic assembly into the lifting gear (pay attention to the center hole on the beam) and tighten it.

7. Check whether the pull plate, beam and support tube are accurately positioned. 

8. Transport the small plug of the hydraulic assembly with a pressure rod, and the cylinder sleeve can be pulled out smoothly.

ProductSiteLaunchDate : 2024-11-14T06:32:52.803Z
Style : fashion
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Voltage : 331 volts