Cart 2 india

Specification
Brand : Deeoee
BulletPoint : AC 85-230V 10A SHT2000 LED Digital Temperature Humidity Controller Thermoregulator thermostat Hygrometer Control 50/60Hz
ExternallyAssignedProductIdentifier : 4862440197001
ItemName : AC 85-230V 10A SHT2000 LED Digital Temperature Humidity Controller Thermoregulator Thermostat Hygrometer Control 50/60Hz
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : humidifier-accessories
Manufacturer : Deeoee
Material : Copper
NumberOfItems : 1
PartNumber : CXXMODULE-10358
ProductDescription :
Product Name: Temperature and Humidity Controller
Product model: SHT2000
Supply voltage: AC 110~230V
Power supply frequency: 50/60Hz
Temperature range: -20~60°C
Humidity measurement range: 0%~100%RH
Temperature measurement accuracy: 0.3 °C
Humidity measurement accuracy: 3%
Output control: relay output
Output power: MAX 10A
Setting method: Start value <stop value (program automatically determines working mode is heating/humidifying mode)
Setting method: Start value > stop value (the program automatically determines the working mode is cooling/dehumidifying mode)
Heating/cooling mode setting
Setting mode: setting (starting temperature): Press and hold the ▲ button to start the temperature flashing. Use ▲▼ key to set the starting temperature value.
Setting (stop temperature): Press and hold the ▼ button to stop the temperature flashing. Use ▲▼ to set the stop temperature value.
Heating use case: control the water heater, heat to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again
The first step: heating mode, starting temperature <stop temperature
Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 50 °C.
Step 3: Press and hold the ▼ button to stop the temperature flashing. Set the stop temperature to 65 °C with ▲▼ keys, and the setting is completed!
Refrigeration use case: use in the farm, the fan is ventilated to 26 ° C to stop, the temperature is raised to 30 ° C and the ventilation is started again.
The first step: cooling mode, starting temperature > stop temperature
Step 2: Press and hold the ▲ button to start the temperature flashing. Use ▲▼ to set the starting temperature to 30 °C.
The third step: long press the ▼ button to stop the temperature flashing, set the stop temperature to 26 °C by ▲▼, the setting is completed!
Humidifi
ProductSiteLaunchDate : 2021-06-26T18:41:11.237Z