Cart 2 india

Specification
Brand : KOTBANIU
BulletPoint1 : Package includes: 10 pcs bonnet and poppet repair kits with bonnet, stem, spare rubber ring, spring, lubricant, poppet, gasket, e-ring.
BulletPoint2 : Suitable for:Fit for Febco 765 CBV 1/2", for Febco 765 DBV 3/4" for part number 905-211 backflow preventer, pressure vacuum breaker. Note: Please check that part number 905-211 is the correct part you need before placing your order.
BulletPoint3 : Material: Made of high quality material, lead free, strong sealing and long service life.
BulletPoint4 : Easy to install: The bonnet can be installed by simply twisting it by hand. To facilitate installation, it is recommended that the included lubricant be applied to the bearings and threads before use.
BulletPoint5 : After-sales service: If the product has any quality problems, we will provide 30 days return service.
Color : BP211-10PCS
ExteriorFinish : Polished
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
IncludedComponents : bonnet, stem, spare rubber ring, spring, lubricant, poppet, gasket, e-ring.
IsAssemblyRequired : 1
ItemName : Bonnet and Poppet Repair Kit for FEBCO 765 1/2" and 3/4" Fit for Part Number 905-211 Backflow Preventer, Pressure Vacuum Breaker (10 Pack, Including Lubricant)
ItemPackageDimensions_Height : 2.76 inches
ItemPackageDimensions_Length : 2.87 inches
ItemPackageDimensions_Width : 2.76 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automatic-lawn-watering-equipment-accessories
Manufacturer : KOTBANIU
Material : Plastic
ModelName : KOTBANIU
ModelNumber : KOTBANIU-01
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 18
NumberOfSets : 1
PartNumber : BP212
PlantOrAnimalProductType : plastic
ProductDescription : Specifications:

--Colour: Yellow
--Part Number: 905-211
--Material: ABS
--Fit for FEBCO 765 CBV 1/2"
--Fit for FEBCO 765 DBV 3/4"

How to install?

1. Close the inlet and outlet shut-off valves to drain the residual water.
2. Remove the old bonnet and poppet and place the new poppet into the chamber.
3. Unscrew the nut from the top of the bonnet.
4. Put the bonnet post through the bonnet hole and turn it clockwise to fix the bonnet and poppet together.
5. Put the nut on the bonnet and tighten it.

Note:

A. In a few cases, if the problem of not tightening occurs, it is recommended to apply lubricant to the bonnet area as well as the threads. A wrench can also be used to tighten it properly. Do not over-tighten and cause damage to the product.

B. After the installation is completed and the inlet valve is opened, splashing is normal, and the splashing will stop after the device is pressurized.

ProductSiteLaunchDate : 2024-05-09T02:39:31.016Z
SafetyWarning : Always ensure a tight connection to prevent leaks. Install in a dry area to avoid electrical hazards. Keep away from children and pets.
Size : 1/2" Barbed Irrigation Fittings-18P
Style : Minimalist
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 25170000
WarrantyDescription : one month