Cart 2 india

Specification
AgeRangeDescription : Kid
BatteriesRequired : 1
Brand : FLIPSKY
BulletPoint1 : 75100 pro v2.0 is an ESC controller, which can be used for electric skateboards/scooters/electric bicycles/robots/DIY off-road vehicles/combat off-road vehicles, etc.
BulletPoint10 : You can refer to the video. If you still don’t understand, you can contact us to send relevant videos.
BulletPoint2 : The ESC is the Benjamin ESC series. Please use the VESC TOOL tool to adjust the parameters before use. The factory version firmware is 6.02. If you need other versions, please go to the VESC tool software (Firmware) and select the corresponding version. The version can't be used incorrectly. Different firmwares may cause differences in parameters; otherwise, it may easily cause damage to the ESC parameters.
BulletPoint3 : PLS note:Except for Apple computers, other computer firmware can be downloaded from our official website. Apple computers can only be purchased on Apple.Please strictly refer to the instructions and wiring diagram to ensure the safe use of the product.
BulletPoint4 : When you just connect the controller, pay attention. If the versions are inconsistent, the page will pop up. If they are inconsistent, you need to change them to be consistent before adjusting the parameters.
BulletPoint5 : Voltage range: 14-84V (safe within 4-20S). Don't exceed the voltage range, which may cause the ESC to burn out.
BulletPoint6 : Continuous current: 100A;
BulletPoint7 : BEC: 5V@1.5A, 5V output current, the receiver can't exceed 1.5A.With relative filtering.
BulletPoint8 : lease connect according to the wiring diagram, and pay special attention to 3.3V and 5V. Do not short-circuit. Note: When using any throttle handle, under ADC control, make sure that the positive pole of the power supply is connected to 3.3V, not 5V.
BulletPoint9 : Warm reminder: The ESC seat is easy to fall off, please do not be too violent when using it.The battery and motor ports must be welded firmly
Color : Black
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 768481810555
ExternallyAssignedProductIdentifier2 : 0768481810555
GpsrSafetyAttestation : 1
ImportDesignation : Imported
IncludedComponents : controller and lcd display
IsAssemblyRequired : 1
ItemName : FLIPSKY 75100 Pro V2.0 75V 100A with Aluminum PCB with Key Switch Based on VESC for Electric Skateboard/Scooter/Ebike Speed Controller
ItemPackageDimensions_Height : 19.2024 centimeters
ItemPackageDimensions_Length : 10.3124 centimeters
ItemPackageDimensions_Width : 16.7894 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : sports-scooter-accessories
Manufacturer : Flipsky
Material : Aluminum
ModelName : 1000W 1500W 1800W brushless controller with thumb display
ModelNumber : 75100 pro V2.0 with key switch
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Alomejorb0q14terma1697
ProductDescription :

1.75100 pro v2.0 is an ESC controller, which can be used for electric skateboards/scooters/electric bicycles/robots/DIY off-road vehicles/combat off-road vehicles, etc.

2.The ESC is the Benjamin ESC series. Please use the VESC TOOL tool to adjust the parameters before use. The factory version firmware is 6.02. If you need other versions, please go to the VESC tool software (Firmware) and select the corresponding version. The version cannot be used incorrectly. Different firmwares may cause differences in parameters; otherwise, it may easily cause damage to the ESC parameters.

3.PLS note:Except for Apple computers, other computer firmware can be downloaded from our official website. Apple computers can only be purchased on Apple.Please strictly refer to the instructions and wiring diagram to ensure the safe use of the product.

4.When you just connect the controller, pay attention. If the versions are inconsistent, the page will pop up. If they are inconsistent, you need to change them to be consistent before adjusting the parameters.

5.Voltage range: 14-84V (safe within 4-20S). Do not exceed the voltage range, which may cause the ESC to burn out.

6.Continuous current: 100A;

7.BEC: 5V@1.5A, 5V output current, the receiver cannot exceed 1.5A.With relative filtering.

8.Please connect according to the wiring diagram, and pay special attention to 3.3V and 5V. Do not short-circuit. Note: When using any throttle handle, under ADC control, make sure that the positive pole of the power supply is connected to 3.3V, not 5V.

9.Warm reminder: The ESC seat is easy to fall off, please do not be too violent when using it.The battery and motor ports must be welded firmly

10.You can refer to the video. If you still don’t understand, you can contact us to send relevant videos.

ProductSiteLaunchDate : 2023-11-18T05:40:37.639Z
Size : middle
SupplierDeclaredDgHzRegulation : not_applicable
TargetGender : unisex
TensionLevel : 1 piece
Theme : Sport
UnspscCode : 26111500
WarrantyDescription : 2m