Cart 2 india

Specification
Brand : Irritec
BulletPoint : Made in China
BulletPoint1 : This fitting is used to connect 5/8" drip tape to mainline tubing. Simply punch a hole in the mainline tubing, connect the drip tape to the tape end of the fitting and insert the barbed end into the punched hole
BulletPoint2 : To create a tight seal, be sure tape is warm and pliable before attaching the 5/8" start fittings and end fittings. If leakage continues to occur, a 1/4 turn with pliers should suffice
BulletPoint3 : This fitting allows a flow of 80 GPH at 10 PSI
BulletPoint4 : The barb on this fitting is slightly larger than the a standard 1/4" barb.
BulletPoint5 : Make the appropriate sized hole for this fitting. Does not connect to 1/4" tubing
Color : Green
ConnectorType : Barb
Department : unisex-adult
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 3503624122846
ExternallyAssignedProductIdentifier1 : 0689728654780
ExternallyAssignedProductIdentifier2 : 689728654780
ExternallyAssignedProductIdentifier3 : 00720413302224
IncludedComponents : Raindrip Swivel/ Compression Tee 3/4 " Male Plastic 5/8 " Carded
ItemDisplayWeight : 0.3 pounds
ItemName : Irritec Tape x 1/4" Barb (100 pk)
ItemPackageDimensions_Height : 15.3 centimeters
ItemPackageDimensions_Length : 1.5 centimeters
ItemPackageDimensions_Width : 8.9 centimeters
ItemPackageQuantity : 100
ItemTypeKeyword : automatic-lawn-watering-equipment-accessories
ItemTypeName : Raindrip Swivel/ Compression Tee 3/4 " Male Plastic 5/8 " Carded
Manufacturer : Irritec
Material : pvb
ModelName : Raindrip Swivel/ Compression Tee 3/4 " Male Plastic 5/8 " Carded
ModelNumber : C-a2203Ra05-100
NumberOfItems : 1
NumberOfPieces : 100
NumberOfPieces1 : 10
NumberOfPieces2 : 3
PackageLevel : unit
PartNumber : A1-T5B250-100
Pattern : 100pcs-360°-9.5ft
ProductDescription :

This fitting is used to connect 5/8" drip tape to mainline tubing. Simply punch a hole in the mainline tubing, connect the drip tape to the tape end of the fitting and insert the barbed end into the punched hole.

To create a tight seal, be sure tape is warm and pliable before attaching the 5/8" start fittings and end fittings. If leakage continues to occur, a 1/4 turn with pliers should suffice.

This fitting allows a flow of 80 GPH at 10 PSI.

The barb on this fitting is slightly larger than the a standard 1/4" barb. Make the appropriate sized hole for this fitting. Does not connect to 1/4" tubing.

ProductSiteLaunchDate : 2018-03-09T08:00:00.000Z
Size : Pack of 1
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 100