Cart 2 india

Specification
Brand : mtorpt
BulletPoint1 : 【Function】Bonnet and poppet repair kit pefect fit for FEBCO 765 1/2" & 3/4"pressure vacuum breakers;Seals the air in minimal flow scenarios, quickly fix water spillage, waste and freeze.Timely replacement parts ensures original high-quality performance,please confirm your model #905-211 before placing your order.
BulletPoint2 : 【Repair kit Includes】Includes bonnet, O-ring, spring, e-ring, washer, stem, rubber disc, bolts, poppet and oil bag, Lead Free. No special tools required for repair, parts fit together freely.
BulletPoint3 : 【Easy Installation】Before replace the backflow preventer, please turn off the water supply first.Pressure vacuum breaker replacement parts are serviceable from the top of the unit. Get the job done in a matter of minutes, requiring no special tools.In the rare event that you cannot tighten the febco 765 3/4 repair kit into the vacuum breaker, apply the supplied grease to the threads and the two pits on the outer ring of the bonnet part are suitable for a large wrench.
BulletPoint4 : 【Febco 765 1/2" - 3/4" Poppet/bonnet Assembly】: The two pits on the outer ring of the bonnet parts are fittings for a large wrench; tighten with the proper tool, if necessary, and apply the supplied grease to the bonnet parts and the threads of the bronze valve.
BulletPoint5 : 【Please Note】1/2" & 3/4" are the original for FEBCO 765 valve model designations. Please apply the grease on both threading of the bonnet part and bronze valve. Two pits on the outer ring of the bonnet part, use proper tool to tighten if needed.
Color : Black
ConnectorType : Barb
ExteriorFinish : Polished
ExternallyAssignedProductIdentifier : 7433332192526
ExternallyAssignedProductIdentifier1 : 732185002301
ExternallyAssignedProductIdentifier2 : 0732185002301
FitType : Universal Fit
GpsrSafetyAttestation : 1
IncludedComponents : Includes bonnet, O-ring, spring, e-ring, washer, stem, rubber disc, bolts, poppet and oil bag, Lead Free.
ItemName : mtorpt 905-211 Bonnet & Poppet Assembly Repair Kit Replacement for Febco 765 1/2" & 3/4" Pressure Vacuum Breakers and Backflow Preventers Repair Kit
ItemPackageDimensions_Height : 6.5024 centimeters
ItemPackageDimensions_Length : 6.2992 centimeters
ItemPackageDimensions_Width : 6.4008 centimeters
ItemPackageQuantity : 6
ItemTypeKeyword : automatic-lawn-watering-equipment-accessories
Manufacturer : mtorpt
Material : Polyvinyl Chloride (PVC)
ModelName : MTHLF905211
ModelNumber : MTHLF905211
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 6
NumberOfPorts : 2
PackageLevel : unit
PartNumber : MTHLF905211
PlantOrAnimalProductType : plastic
PowerSourceType : DC 24V
ProductDescription :

Step.1 Close the outlet shutoff valve,then close the inlet shutoff valve,drain the residual water completely. Then unscrew the top nut and release the brass canopy. Take out the old Bonnet & Poppet parts and dispose.

Step.2 Put the new poppet inside the chamber.Unscrew the nuts from the bonnet copper column,then hand tighten the bonnet part clockwise into the vacuum breaker(Apply grease on threading if needed.) Place the canopy onto the secured bonnet part by put bonnet column through the canopy hole. Tighten the top nuts back to secure the canopy.

Step.3 Open the inlet ball valve to pressurize the device,temporary "splash"is normal,the "splash"will auto shutoff once the device is fully pressurized.Then slowly open the outlet ball valve to fill the downstream line.

ProductSiteLaunchDate : 2024-05-12T13:37:05.716Z
SafetyWarning : Always ensure the watering bag is securely attached to the tree trunk or placed next to the plant to prevent it from falling over. Be cautious when inserting the water outlets into the ground to avoid damaging the tree roots or causing injury. Keep the bag away from heat sources and do not expose it to direct sunlight for extended periods. Always follow local regulations and guidelines for water usage and disposal. Keep the bag out of reach of children and pets when not in use.
Size : 1 in
SpecificationMet1 : UL
SpecificationMet10 : WaterSense
SpecificationMet11 : ISO 9001
SpecificationMet12 : MSS SP 25
SpecificationMet13 : OSHA
SpecificationMet14 : CE
SpecificationMet15 : ASSE
SpecificationMet2 : CSA
SpecificationMet3 : ASTM
SpecificationMet4 : NSF
SpecificationMet5 : ANSI B16.11
SpecificationMet6 : ANSI B1.20.1
SpecificationMet7 : UPC
SpecificationMet8 : FM
SpecificationMet9 : MSS SP 67
Style : Automatic
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 6
UnspscCode : 25170000
WarrantyDescription : During the installation:please do not over-tighted the product.