Cart 2 india

Specification
Brand : POVOKICI
BulletPoint1 : Squeegee durometer is the squeegee "hardness" that determines the amount of pressure required to push ink through mesh. In general, soft Squeegees leave a thicker ink deposit, while hard squeegees deposit a thinner amount.
BulletPoint2 : 60 durometer is the softest and leaves a minimal ink deposit, its great for very thin ink and water based inks. 70 durometer is by far the most popular an versitile in the garment industry; it's a great general purpose blade for just about everything. 80 durometer provides a stronger force and larger deposit for thick opaque inks. 70/90/70 triple durometer gives you a soft edge with a hard center for optimal control.
BulletPoint3 : Maintenance: Achieving the best Screen Printing performance and productivity is greatly dependent on the selection of the correct squeegee for the application and proper squeegee maintenance. When printing, monitor production time and rotate squeegees frequently. The blade should be allowed to recover from the ink and solvent attack and rest for a period of 24 hours. It can then be placed back into production, or if necessary re-sharpened and placed back into production.
BulletPoint4 : Storage: Polyurethane Squeegees should always be stored flat in a dry (50% Relative Humidity) environment at room temperature. (approximately 60-70 degrees F) Storage at temperatures below 60 degrees F may show an increase in durometer. This increase has no influence on the physical properties or the performance of the polyurethane. Under these storage conditions. Older squeegees often show increased printing performance.
BulletPoint5 : US Stock: Great customer service.
Color : Same as the Picture
ExternallyAssignedProductIdentifier : 8414830879316
GpsrSafetyAttestation : 1
ItemName : POVOKICI Squeegee Blade 70/90/70 Triple Durometer - 6´ Roll for Screen Printing
ItemPackageDimensions_Height : 31.0896 centimeters
ItemPackageDimensions_Length : 5.8928 centimeters
ItemPackageDimensions_Width : 24.1046 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : screen-printing-accessories
Manufacturer : sign-in-global
Material : Garment
ModelNumber : SIG-29816
PartNumber : SIG-29816
ProductDescription : US Stock Squeegee Blade 70/90/70 Triple Durometer - 6' Roll
Squeegee durometer is the squeegee "hardness" that determines the amount of pressure required to push ink through mesh. In general, soft Squeegees leave a thicker ink deposit, while hard squeegees deposit a thinner amount.

What durometer should you use?
60 durometer is the softest and leaves a minimal ink deposit, its great for very thin ink and water based inks.
70 durometer is by far the most popular an versitile in the garment industry; it's a great general purpose blade for just about everything.
80 durometer provides a stronger force and larger deposit for thick opaque inks.
70/90/70 triple durometer gives you a soft edge with a hard center for optimal control.

Maintenance:
Achieving the best Screen Printing performance and productivity is greatly dependent on the selection of the correct squeegee for the application and proper squeegee maintenance. When printing, monitor production time and rotate squeegees frequently. (The necessary rotation frequency is dependent on the ink / solvent system involved in the application) By doing so, you will achieve a more uniform print quality and increase the life of your squeegees. A squeegee should always be wiped clean and dry following removal from the press and stored in a dry environment at room temperature. The blade should be allowed to recover from the ink and solvent attack and rest for a period of 24 hours. It can then be placed back into production, or if necessary re-sharpened and placed back into production.

Package:
Packing Size: 24.5 x 24 x 5.5 cm
Gross Weight: 1.07 kg
ProductSiteLaunchDate : 2020-03-10T09:23:20.583Z
Size : 9.65"x9.45"x2.17"( 245x240x55mm)
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 47121803