Home / Industrial & Scientific / Accessories

QDYZPP for Hydraulic Log Splitter Cylinder Rebuild Seal kit for 4.5

QDYZPP for Hydraulic Log Splitter Cylinder Rebuild Seal kit for 4.5"Bore x 1.75"Rod cylinde

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 7700/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Proceed to Pay

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : qdyzpp
BulletPoint1 : Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.
BulletPoint2 : Wear rings. Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon
BulletPoint3 : Piston seals 1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR
BulletPoint4 : Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
BulletPoint5 : Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU
ExternallyAssignedProductIdentifier1 : 0717025610472
ExternallyAssignedProductIdentifier2 : 717025610472
ItemName : QDYZPP for Hydraulic Log Splitter Cylinder Rebuild Seal kit for 4.5"Bore x 1.75"Rod cylinde
ItemTypeKeyword : hydraulic-cylinder-accessories
Manufacturer : QDYZPP
Material : Plastic
PartNumber : HDS54XW
ProductDescription : Condition: New Part Type:cylinder rebuild seal kit Seal Size: 4.5"Bore x 1.75" Brand: Aftermarket Material :Rubber Plastic Product Description: Hydraulic Log splitter cylinder rebuild seal kit for 4.5"Bore x 1.75" rod cylinder To know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in. 1. Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size. 2. Wear rings. Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon 3. Piston seals 1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR 4. Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside. 5. Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU
UnspscCode : 31410000

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.