Cart 2 india

Specification
Brand : qdyzpp
BulletPoint1 : Cylinder tube Bore (I.D.) 4.5" x rod (O.D) 1.75". Please note: 4.5" bore size is not Cylinder tube O.D. Cylinder rod size is inside tube part size.
BulletPoint2 : Wear rings. Piston wear ring : 114.3 mm (OD 4.5") x 107.95mm (ID 4.25”) x 9.53mm (0.375" wide), Nylon Rod wear ring : 44.5mm (ID 1.752") x 50.8mm (OD 2”) x 9.53mm (0.375" wide), Nylon
BulletPoint3 : Piston seals 1 square ring and 1 O-ring. Piston Square ring: 114.3 mm x104.3mm x 3.28mm; O-ring (installed under the square ring): 103mm x 2.65mm. CPU + NBR
BulletPoint4 : Rod O-ring (item 13): 44.5mm x 54mm x 5mm, CPU. There is O-ring inside.
BulletPoint5 : Rod dust ring (Item 12): 44.5mm x 54mm 5.5mm /7.3mm, TPU
CompatibleWithVehicleType : Car
CpsiaCautionaryStatement : no_warning_applicable
ExternallyAssignedProductIdentifier1 : 0717025608943
ExternallyAssignedProductIdentifier2 : 717025608943
IncludedComponents : Hydraulic Cylinder
ItemName : QDYZPP Hydraulic Log Splitter Cylinder Rebuild Seal kit for 4.5"Bore x 1.75"Rod cylinde
ItemPackageDimensions_Height : 67.31 centimeters
ItemPackageDimensions_Length : 11.43 centimeters
ItemPackageDimensions_Width : 12.192 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hydraulic-cylinder-accessories
Manufacturer : QDYZPP
Material : Plastic
ModelNumber : 3001-5041
NumberOfBoxes : 1
NumberOfItems : 1
OemEquivalentPartNumber : 04653-U2010-71
Orientation : Front
PartNumber : DH48JA
ProductDescription : Condition: New Part Type:cylinder rebuild seal kit Seal Size: 4.5"Bore x 1.75" Brand: Aftermarket Material :Rubber Plastic Below is 4.5"Bore x 1.75" rod cylinder Specification that OEM made by this seal kit: Retracted (center to center between rod mountain hole and clevis hole: 32.4” Extended (center to center same as above): 56.4” Stroke: 24±0.05” Dimension from center of clevis hole to back face of cylinder: 2.95” Dimension from center of rod end hole to front face of rod: 1.06” Dimension from center of rod end hole to front face of cylinder: 1.18” Ports: 1/2" NPT Dimension from port to port: 25.4” Rod: 1.75" rod Rod end mountain hole: 0.55” Clevis Mountain hole: 1.16” Dimension between mountain clevis to clevis: 0.87” Thickness of each mountain clevis: 0.375” Length of each mounting clevis: 4.125”
ProductSiteLaunchDate : 2018-10-15T12:38:29.091Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31410000