Cart 2 india

Specification
Brand : Tucool Racing
BulletPoint : Tucool Racing 1.25mm orifice: for 150Bar ~ 280Bar pressure washer
BulletPoint1 : Specs - Maximum Pressure: 3000 PSI. Maximum Flow: 2.5 GPM. Maximum Pump Speed: 3450 RPM. Shaft Diameter: 3/4" Shaft. 4 Bolt Pattern: 2 5/8" Center to Center between Outer Holes. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information
BulletPoint2 : Includes - (1) Horizontal Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube; comes as shown in the first image
BulletPoint3 : This pump mounts horizontal and can face any direction that allows the hose connections to be accessible. Pump needs at least 6HP to handle PSI. Pump head CANNOT be flipped, but pump can be mounted in different directions
BulletPoint4 : Please note it is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury
BulletPoint5 : 【ABOUT US 】We have our own overseas warehouse and a professional Customer Service Team to reply you within 24 hours. If you have any Questions, please feel free to contact us. We promise you that we will do our ultmost to solve it for you firstly.
Color : TQR-1.35mm Orifice Nozzle Screw
ExteriorFinish : Brass
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Silver
ItemName : Tucool Racing 1.35mm Orifice Nozzle Screw for 150Bar ~ 280Bar pressure washer (TQR-1.35mm Orifice Nozzle Screw)
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : pressure-washer-accessories
ItemTypeName : Tucool Racing Snow Foam Lance Cannon
Manufacturer : Tucool Racing
Material : Aluminum
Material1 : Nylon
Material2 : Brass
MaximumFlowRate : 2.5 gallons_per_minute
MaximumPressure : 4000 pounds_per_square_inch
ModelName : TRQRKAFL
ModelNumber : TRQRKAFL
PartNumber : TQR
PowerSourceType : Mechanical
ProductDescription : Tucool Racing Snow Foam Lance Cannon Suitable for 1/4 Quick Connect Pressure Washer

1. It makes soft fluffy snow foam, fun and simply.
2. It works with any pressure washers, small and big are all working perfectly.
3. It saves water, It’s eco-friendly.
4. It’s touch-less car wash, it saves your time and energy.
5. The thick foam suds melt rods and dirty on paint, thus it reduces swirl marks and scratches.

How To Use:
1. Put PTFE tape on the brass tube (two threads), each thread needs 50cm PTFE tape.
2. Put the fitting/adapter with brass tube and suction tube on foam lance unit.
3. Fill fluid bottle with desired amount of shampoo.
4. Fill fluid bottle with water (for best results, use warm water, 20% shampoo +80% water is suggested).
5. Shake the fluid bottle to mix the shampoo with water thoroughly.
6. Attach fluid bottle to foam lance unit.
7. Attach the fitting/adapter to pressure washer gun, and you can start playing with it.

Specifications:
Pressure Range: 1300psi - 3600psi (both small and big pressure washer works perfectly)
Foaming Performance: 5 Star (we guarantee it is the best foam lance in foaming performance)

Capacity of bottle: 1000ml(1L)
Construction Material: Solid Brass, resistant Nylon(known as PA material), and HDPE bottle.
Maximum Water Temperature: 60 oC

As there are two kinds of adapters for this brand of pressure washers. Please check the photo of adapter size and make sure it fits your pressure washer before you order. We have shown the picture of adapter size on the product description, so we don't take any responsibility of incompatibility of your adapter if you made a wrong order.

If you need assistance for choosing the correct adapter, please feel free to contact us.
ProductSiteLaunchDate : 2023-05-14T10:00:54.073Z
Style : Above Ground
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1