Heavy Duty LED Light Strip (Red, 42")

Customer rating 4.6 stars

Imported from USA | Ships in 10 working days

5% additional discount on UPI | Cash On Delivery available

1

₹23340 -31% ₹16100/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Boogey Lights
BulletPoint1 : We took our already rugged, reliable Hi-Intensity Low Profile 12vdc LED strips and encased them in black flexible PVC to create this IP67 rated HEAVY DUTY LED STRIP. The brightest, toughest Heavy Duty LED strip available. Each LED strip has a 36" power lead hard wired and sealed to one end of the strip. Each Heavy Duty LED strip has a plastic end cap secured to the end with a screw hole allowing these strips to be screwed to the mounting surface for additional holding power.
BulletPoint2 : Tougher AND Brighter. Depending upon the length, each Heavy Duty LED Strip contains between 15 and 75 high-intensity super-bright 12vdc 5050 tri-chip LEDs. No other Heavy Duty LED strip on the market today has more LEDs per foot than Boogey Lights.
BulletPoint3 : The PCB is black, created with 2 ounce copper and encased in industrial grade PVC with 1.2mm of 3M VHB tape affixed to the back. NOTE: You must use 3M Adhesion Primer 94 (NOT included) when mounting this strip if you want the strip to stay stuck. When mounted to virtually any smooth clean surface using 3M Adhesion Primer 94 the LED strip will not fall off. The 3M VHB tape + 3M Adhesion Primer creates an instant bond which cements the strip to the mounting surface.
BulletPoint4 : Boogey Lights products are designed, assembled and supported in the United States.
Color : Red
ControlMethod : application
ExternallyAssignedProductIdentifier1 : 812928020431
ExternallyAssignedProductIdentifier2 : 0812928020431
FormFactor : Strip
IncludedComponents : Heavy Duty LED Strip
IndoorOutdoorUsage : outdoor
ItemName : Heavy Duty LED Light Strip (Red, 42")
ItemTypeKeyword : powersports-accessory-lights
LightColor : Red, Green, Blue, White, Amber, Orange, Pink, Magenta
Manufacturer : BOOGEY LIGHTS
Material : Polyvinyl Chloride (PVC)
ModelName : Heavy Duty LED Strip
ModelNumber : PGU-HDUTY-AM
NumberOfItems : 1
NumberOfLightSources : 75
OccasionType : not relevant
PartNumber : PGU-HDUTY-AM
PowerSourceType : DC
ProductDescription : Boogey Lights 12vdc HEAVY DUTY LED STRIPS are designed to be used in tough, outdoor and commercial applications where the light strip might take a direct impact, subjected to harsh outdoor conditions or submersed in water. The flexible PVC provides an extra, dual layer of protection above and beyond our already tough LED light strips. Ideal for heavy duty trucks, wreckers, tow trucks, emergency vehicle lighting, off-road machines, ATVs, side-by-sides, tool box compartments, vehicle storage bins, truck beds and heavy duty truck commercial applications. Also ideal for marine applications where the LEDs will be submerged in water for brief periods (although they are not marine grade). The fully encased, flexible design allows these strips to flex. The flexible PVC also protects the LEDs from a direct hit (e.g. rock, hammer, tool box, tire chains, etc) as well as allows them to be submersed in water or used in harsh outdoor conditions. Boogey Lights Heavy Duty LED strips are available in eight super bright 5050 tri-chip single colors and five lengths ranging from 12" to 52". NOTE: These are fixed length LED strips. They cannot be cut. Designed for use with 12vdc systems, these Heavy Duty LED strips are .5" wide and .25" tall (the length varies from 12" to 52" depending on which version you select). They include a 36" power lead hard wired and sealed to one end of the strip. The power lead has 4 conductors; 3 positive leads (one for each diode in the tri-chip LED) and 1 negative/ground lead. Each Heavy Duty LED strip has a plastic end cap secured to the end with a screw hole allowing these strips to be screwed to the mounting surface for additional holding power. Each strip has industrial grade 3M VHB tape on the back. When mounted to virtually any smooth clean surface using 3M Adhesion Primer (NOT included), the LED strip will not fall off. The 3M VHB tape + 3M Adhesion Primer 94 creates an instant bond which cements the strip to the mounting surface.
ProductSiteLaunchDate : 2023-12-30T15:49:57.945Z
RecommendedUsesForProduct : Vehicle Exterior
Size : 42"
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
Theme : not relevant
UnitCount : 1
UnspscCode : 39112000
Voltage : 12 volts
WarrantyDescription : One year original owner manufacturers warranty.
WaterResistanceLevel : waterproof

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
5
4*
3
3*
0
2*
0
1*
0

Read all 8 customer reviews

Highly recommended for everyone.

Very useful and nicely packaged.

Impressive quality and durability.

This works like a charm.

Five stars all the way.

Meets expectations, good buy.

Highly recommended for everyone.

Very functional and easy to use.

Have an opinion on this page? Let's hear it.