Cart 2 india

Specification
Brand : Wooden Camera
BulletPoint1 : Convert to PL Mount: Enable the use of PL mount lenses on your Sony FX6 with this E-Mount to PL-mount shimmable adapter
BulletPoint2 : Adjustable Shims: Adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. The shim set includes seven shims which are color coded for different thicknesses
BulletPoint3 : Support Ring Included: Mount includes a support ring that integrates with Wooden Camera Top Plate (Sony FX6), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter
BulletPoint4 : Compatible With: This adapter is also compatible with any E-Mount camera like the FS7mkII, FX9, A7, A7r, A7s, A7II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilized
BulletPoint5 : Includes PL Cap: Included cap prevents dust from entering sensor area when lens is not attached
Color : Black
CompatibleDevices : Cameras
CompatibleMountings : Canon EF
ExternallyAssignedProductIdentifier1 : 0606184860050
ExternallyAssignedProductIdentifier2 : 606184860050
FocusType : Auto Focus
ItemName : Wooden Camera E-Mount to PL Mount Pro Adapter Compatible for Sony FX6, with Adjustable Shims, Lens Support Ring and PL Cap
ItemPackageDimensions_Height : 21.1 centimeters
ItemPackageDimensions_Length : 5.8 centimeters
ItemPackageDimensions_Width : 11.4 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : camera-lens-adapters
LensDesign : Prime
Manufacturer : Wooden Camera
MaxFocalLength : 85 millimeters
MinFocalLength : 17 millimeters
PartNumber : 283200
ProductDescription : Wooden Camera E-Mount to PL Mount Pro (Sony FX6) is a shimmable Sony E-Mount to PL mount adapter that enables mounting of PL mount lenses onto the Sony PXW-FX6 camera. In our factory, we set the flange focus to match the Sony FX6; You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Mount includes a support ring that integrates with our Top Plate (Sony FX6), a highly recommended addition to this system. Loosen the support ring thumbscrew to quickly remove the mount and install another adapter. PL Cap included to prevent dust from entering the sensor area when the lens is not attached. This adapter will also work with any E-Mount camera like the FS7mkII, FX9, A7, A7r, A7s, A7II, FS100, FS700, NEX-5, NEX-6, NEX-7, etc, however, the support ring would not be utilized. Features: Support ring capable of integrating with Top Plate (Sony FX6). Includes: (2) support screws, Shim set (stackable to achieve necessary thickness) - Silver .0127mm (0.0005"), Amber .0254mm (0.001"), Purple .0381mm (0.0015"), Red .0508mm (0.002"), Green .0762mm (0.003"), Tan .1016mm (0.004"), Blue .127mm (0.005")
ProductSiteLaunchDate : 2021-05-14T17:43:27.938Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1