Cart 2 india

Specification
Brand : IndiPRO
BulletPoint : sony AC-V615 & DK-415 for GV-A500 EVO-250 GV-D300 GV-D900
BulletPoint1 : Extended Power to Two 7.2V Devices
BulletPoint2 : Four LP-E6 Battery Slots
BulletPoint3 : Two 2.5mm DC Output Jacks
BulletPoint4 : LED Indicator
BulletPoint5 : 1/4"-20 Threads for Clamps / Shoe Mounts
BulletPoint6 : Two Slots Swappable at a Time
BulletPoint7 : Variety of Output Cables Supported
BulletPoint8 : Lightweight PVC Enclosure
Color : black
CompatibleDevices : camera
CompatiblePhoneModels : Sony
ConnectivityTechnology : USB
ConnectorGender : Male-to-Male
ConnectorType : MagSafe
CurrentRating : 1 amps
ExternallyAssignedProductIdentifier1 : 859576003973
ExternallyAssignedProductIdentifier2 : 0859576003973
FrequencyRange : 60HZ
Hazmat : 9
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
InputVoltage : 110 volts
ItemName : 4X LP-E6 Battery Adapter Plates Power Pod | 7.2V Regulation| Re-Use Your LP-E6 Type Batteries to Power New Devices | ¼-20” Mounting Inserts |2X 2.5mm DC Output | Hot Swappable
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : camera-power-adapters
Manufacturer : Indipro Tools
ModelName : LP E6
ModelNumber : QPDLP72
MountingType : Wall Mount
NumberOfItems : 1
OutputVoltage : 12 volts
PartNumber : OBPCQ7
PowerSourceType : Corded Electric
ProductDescription : Offering four LP-E6 battery slots, and dual 1/4"-20 mounting threads on the sides, this Power System allows you to provide extended power to a wide range of cameras and accessories in various mounting setups. It features 2x 2.5mm DC output jacks that lets you connect out to a 7.2V device using an appropriate cable (not included). This Power System can conveniently be attached to a camera or monitor directly. A variety of regulated and unregulated cables are available from Indipro Tools for compatibility with different devices. Two 1/4"-20 threads, one on each of two sides, allow you to use rod clamps and shoe mounts for mounting. Only one battery is required to be used at a time, so you can hot swap batteries. An LED indicator remains lit if sufficient power is available.
ProductSiteLaunchDate : 2015-10-10T09:11:54.079Z
SpecificationMet : Qi
SupplierDeclaredDgHzRegulation : not_applicable
TotalUsbPorts : 1
UnitCount : 1
UnspscCode : 26111704
WarrantyDescription : 1 year