Cart 2 india

Specification
Brand : AGULIUM
BulletPoint1 : Precise Drip: The minimum drip volume is 0.01ml, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%
BulletPoint2 : Semi-automatic Design: It can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position
BulletPoint3 : Vacuum Back Suction: This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively avoid the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean and tidy working environment
BulletPoint4 : High-precision Air Pressure Gauge: The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break
BulletPoint5 : Application: The semi-automatic glue dispenser machine is suitable for most of the yellow glue, quick-drying glue, epoxy resin, etc. and is widely used in bonding various electronic components, machine production, instrumentation, jewelry, and other objects
Color : Assorted Color
ExternallyAssignedProductIdentifier : 8679088088594
GpsrSafetyAttestation : 1
IncludedComponents : Nozzle Spray
IncludedComponents1 : 1* Dispenser Main Unit; 1* Manually Switch; 1* Foot Switch; 1* Air Tube; 1* Connection Tube; 1* Power Cord
IncludedComponents2 : 1*Dispenser Stand; 2* 30CC Liquid Barrels; 6* Dispensing Needles; 1* Manual
IncludedComponents3 : 4 Grouting Scraper
IncludedComponents4 : 1 Extension Rod
IncludedComponents5 : 1 Universal Small Elbow
ItemDisplayDimensions_Height : 1.1 inches
ItemDisplayDimensions_Length : 3.46 inches
ItemDisplayDimensions_Width : 1.1 inches
ItemDisplayWeight : 0.7 pounds
ItemForm : Liquid
ItemName : AGULIUM Semi-Automatic/Manual Glue Dispenser Machine, 0.01ml Min Drip Volume, Solder Paste Liquid Adhesive Controller Dropper Machine for Yellow Glue, Quick-Drying Glue, Epoxy Resin
ItemPackageDimensions_Height : 3.15 inches
ItemPackageDimensions_Length : 7.87 inches
ItemPackageDimensions_Width : 5.91 inches
ItemTypeKeyword : adhesive-dispenser-accessories
Manufacturer : AGULIUM
Material : Plastic and stainless steel
MaximumGapFill : 3.5 inches
MetalType : other
ModelName : Caulk Extension Nozzle
ModelNumber : JZON597TUSY
NumberOfBoxes : 1
NumberOfItems : 24
PartNumber : F07G116S2A55P8RDV8C
PowerSourceType : hydraulic_powered
ProductDescription :

Specification

• Color: Black
• Model: 982
• Material: Metal
• Spitting Mode: Manual / Semi-automatic
• Minimum Drip Volume: 0.01ml
• Spitting Time Interval: 0.1-9.9s
• Automatic Timing(Can Be Set): 0.01-30s 
• Repeat Accuracy: ±0.5%
• Internal Voltage: 12-24DC
• Input Air Pressure: 2.5-7bar(35-100psi)
• Output Air Pressure: 0.1-5.5bar(1-78psi)
• Power Supply: 110V AC, 60Hz 
• Power Consumption: 20W
• Plug Specification: American Standard 110V
• Product Size:23*15*6cm/9.05*5.9*2.36in
• Gross Weight: 2.1kg/4.63 lbs

Package 

• 1* Dispenser Main Unit
• 1* Manually Switch
• 1* Foot Switch
• 1* Air Tube
• 1* Connection Tube
• 1* Power Cord
• 1*Dispenser Stand
• 2* 30CC Liquid Barrels
• 6* Dispensing Needles
• 1* Manual

 

Notes

• 1.The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.
• 2.If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.
• 3.When the material concentration is too large (flow difficulties), can not drip, if you want to use it, according to the manufacturer's instructions dilute the use; before work, the material must be fully stirred evenly to ensure that the size of the drip consistent.
• 4.Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation. 
• 5.Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.

ProductSiteLaunchDate : 2025-04-29T09:44:20.664Z
Size : 8.80X2.80X2.80CM
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation1 : Tile
SurfaceRecommendation2 : Window
SurfaceRecommendation3 : Door
SurfaceRecommendation4 : Sink
SurfaceRecommendation5 : Tub
SurfaceRecommendation6 : Walls
SurfaceRecommendation7 : Gutter
UnitCount : 1
UnspscCode : 31200000
WaterResistanceLevel : water_resistant