Cart 2 india

Specification
Brand : BINELUCOLU
BulletPoint : 2″- 12 Hole Wide Swirl Titanium, Coated Steel Nozzles with No O-Ring. 12 Hole Wide Swirl nozzle is a 2 inch steel bulk nozzle coated in Titanium to extend nozzle life and create better heat transfer. Swirl Nozzle Replacement for Nordson AD-31 and Glenmar HG12000 hand guns.
BulletPoint1 : Stable performance - The high-precision air pressure gauge can precisely control the air pressure input to the air pump and convert the air pressure precisely to ensure that the air tube will not break. The glue dispenser is made of metal, strong and stable, not easy to damage and corrosion, but also uses the fourth generation chip design circuit board, significantly improving stability.
BulletPoint2 : Precise Drip - The minimum drip volume is 0.01ML, and the spitting interval is 0.1-9.9s. It can drip precisely and achieve a repeat accuracy of about 0.5%. It is also equipped with a single-hole hand control switch, allowing you to control it personally by hand for more accuracy and timeliness.
BulletPoint3 : Vacuum Back Suction - This semi-automatic glue dispenser machine is equipped with a vacuum back suction device, which can effectively prevent the glue from dripping during use to achieve a more accurate glue dripping, and ensure a clean and tidy working environment.
BulletPoint4 : Semi-automatic - Glue dropper can be both automatically dripped by the machine and precisely controlled by a single-hole hand switch. If you want to free your hands, you can set the switch to the automatic position, to achieve a more efficient and higher-quality working method.
BulletPoint5 : Wide Application - It is suitable for most of the yellow glue, quick-drying glue, epoxy resin, etc. in the market, and is widely used in bonding various electronic components, machine production, instrumentation, jewelry, and other objects.
Color : Black
CompatibleMaterial : Rubber
IncludedComponents : 1* Manually Switch 1* Foot Switch 1* Air Tube 1* Connection Tube 1* Power Cord 1*Dispenser Stand 2* 30CC Liquid Barrels 6* Dispensing Needles 1* Chinese and English Manual
ItemForm : Liquid
ItemName : Semi-automatic Glue Dispenser, 110V Automatic Solder Paste Liquid Adhesive Controller Glue Dropper Machine Glue Dispenser Machine
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 2.36 inches
ItemPackageDimensions_Width : 1.97 inches
ItemPackageQuantity : 1
ItemTypeKeyword : adhesive-dispenser-accessories
ItemVolume : 1.3 milliliters
Manufacturer : BINELUCOLU
Material : Epoxy Resin
Material1 : Epoxy Resin
Material2 : Resin
ModelNumber : AGD-01
PartNumber : G250012HSW-NOR-07
ProductDescription :

Specification

Color: Black

Model: 982

Material: Metal

Spitting Mode: Manual / Semi-automatic

Minimum Drip Volume: 0.01ml

Spitting Time Interval: 0.1-9.9s

Automatic Timing(Can Be Set): 0.01-30s

Repeat Accuracy: ±0.5%

Internal Voltage: 12-24DC

Input Air Pressure: 2.5-7bar(35-100psi)

Output Air Pressure: 0.1-5.5bar(1-78psi)

Power Supply: 110V AC, 60Hz

Power Consumption: 20W

Plug Specification: American Standard 110V

Product Size:23*15*6cm/9.05*5.9*2.36in

Package Size:20*26*14cm/10*9*12.5in

Gross Weight: 2.1kg/4.63 lbs

Package Included

1* Dispenser Main Unit

1* Manually Switch

1* Foot Switch

1* Air Tube

1* Connection Tube

1* Power Cord

1*Dispenser Stand

2* 30CC Liquid Barrels

6* Dispensing Needles

1* Chinese and English Manual

Notes:

1. The input high pressure should not exceed 7 bar (100psi), and the maximum working pressure of the glue dropper should not exceed 5.5 bar (78psi). If the working air pressure is above 4 bar, please switch to aluminum connectors.

2. If available, store all materials at a constant temperature (5°) as directed to ensure that the concentration does not change significantly during use.

3. When the material concentration is too large (flow difficulties), can not drip

4. Automatic state, the general air pressure adjustment in the machine at 1-2.7bar (15-40psi) is more appropriate. When working in the automatic state, the strength of the vacuum tube pumping back air should be adjusted to the proper position. Too much pumping back will flush the piston and destroy the normal operation. 

5. Automatic state work, according to the actual situation, timely removal of the material left at the needle nozzle, these materials gradually curing will block the muzzle discharge and back pumping; after work, the barrel should be cleaned in time, otherwise, the barrel's disassembly will be very difficult.

Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement.

ProductSiteLaunchDate : 2023-11-16T07:47:41.096Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
Voltage : 110 volts_of_alternating_current