Cart 2 india

Specification
Brand : IES
BulletPoint1 : Adhesion promoter automotive-- please be sure the the surface dry and clean before applying the adhesive promoter
BulletPoint2 : Automotive adhesion promoter-- scope of application: glass, electronic components, plastics, rubber, metals, ceramics, and other materials
BulletPoint3 : Car accessories-- it should be applied first, and then glued with double-sided adhesive. strengthening the adhesive force of double-sided adhesive
BulletPoint4 : Automotive adhesive enhancers-- this is not glue, it cannot be alone to bond things, it must be with double-sided tape
BulletPoint5 : Adhesive tape supply-- use this adhesive aid on smooth surface, good workmanship, easy to take to many places you want
Color : Black
CompatibleMaterial : Metal
CompatibleMaterial1 : Plastic
CompatibleMaterial2 : Metal
CompatibleMaterial3 : Fiberglass
ExternallyAssignedProductIdentifier1 : 0850019322026
ExternallyAssignedProductIdentifier2 : 850019322026
FcShelfLife : 900 days
IncludedComponents : Adhesion promoter
IsExpirationDatedProduct : 1
ItemForm : Liquid
ItemForm1 : Liquid
ItemForm2 : Gel
ItemForm3 : Paste
ItemName : IES 8413 Inter-Mix 15 Extremely Flexible Seam Sealer/Adhesive - 10 oz / 300ml
ItemPackageDimensions_Height : 3.5 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-adhesives
ItemVolume : 300 milliliters
Manufacturer : IES
Material : Resin
Material1 : Rubber
Material2 : Silicone
ModelNumber : TIN7HG9R1P326IUK1800R99
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : 8413
ProductDescription : A thick-set, non-sagging, firm, extremely flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members. Excellent for pickup beds and around hinges. Will hold brush marks. Excellent adhesion to: bare metal, primed metal, SMC, FRP, fiberglass, aluminum and most plastics*. Our automatic mixing system eliminates errors which are common in manual mixing. DIRECTIONS: 1. The surface must be clean and free of dirt, grease, oil, rust, old seam sealer, and other contaminants. Use IES Super Cleaning Solvent or IES Specialty Adhesive. Remove to clean the surface. 2. Prime all bare metal with epoxy or urethane primer. Allow primer to cure according to the manufacturer’s recommendations. 3. Follow the IES dual cartridge setup instructions for loading the cartridge into the dispensing gun. 4. Dispense IES 8413 Seam Sealer into the joint or seam. Smooth out if desired with a tool or finger and feather edge. 5. IES 8413 will be set up in approximately 15 minutes. 6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 7. Prime and paint per manufacturer’s specifications.
ProductSiteLaunchDate : 2023-09-06T13:46:54.218Z
RecommendedUsesForProduct : Seal and weatherproof windows on vehicles
Size : 5X2.8cm
SpecificUsesForProduct : Repair
SpecificUsesForProduct1 : Glass
SpecificUsesForProduct2 : Electronics
SpecificUsesForProduct3 : Plastics
SpecificUsesForProduct4 : Rubber
SpecificUsesForProduct5 : Metals
SpecificUsesForProduct6 : Ceramics
SpecificUsesForProduct7 : Automotive
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Glass
UnitCount : 10
UnspscCode : 31201600
Viscosity : Low
WaterResistanceLevel : not_water_resistant