Cart 2 india

Specification
Brand : WYDDDARY
BulletPoint1 : Product Parameter: Flow capacity: 230 cfm; Refrigerant Type: R410A; Voltage: 220V; Power: 1000W; Interface pipe diameter: ZG1.5; Air capacity: 6.5m³/min; Work pressure: ≤1.0Mpa; Inlet temperature: ≤45℃; Dew point temperature: 2-10℃
BulletPoint2 : Automatic Drainer: The drain time can be adjusted. If it needs to be adjusted longer, the SEC key on the left can be adjusted to 2 seconds, and the MIN key on the right can be adjusted to 5 minutes (0-10 middle)
BulletPoint3 : Rapid Cooling Performance: Featuring a premium compressor, copper radiating tubes, and powerful fans, this unit ensures rapid cooling for optimal performance
BulletPoint4 : Easy To Install: Easy installation with the compact design is ready to use with a small footprint, matches the compressor's displacement, saving energyeasy maintenance and improved reliability
BulletPoint5 : Note: This machine needs to be connected to the power source for use by the customer. It is recommended that the side of the power cable connected to the machine should be against the wall, with the front side at least 1 meter away from the wall and the back side at least 20 cm away from the wall
ExternallyAssignedProductIdentifier1 : 0198462098953
ExternallyAssignedProductIdentifier2 : 198462098953
ItemName : WYDDDARY 230CFM Compressed Air Dryer Refrigerated Type 220V 1000W Refrigerated Air Dryer Compressed ZG1.5'' Interface Pipe Diameter For 50HP Air Compressor
ItemPackageDimensions_Height : 43.31 inches
ItemPackageDimensions_Length : 40.75 inches
ItemPackageDimensions_Width : 24.02 inches
ItemPackageQuantity : 1
ItemTypeKeyword : industrial-air-motors
Manufacturer : WYDDDARY
PartNumber : CD033237
ProductDescription :

Product parameter:

Refrigerant Type: R410A

Voltage: 220V

Power: 1000W

Interface pipe diameter: ZG1.5

Air capacity: 6.5m³/min

Work pressure: ≤1.0Mpa

Inlet temperature: ≤45℃

Dew point temperature: 2-10℃

Note:

1. Please turn on the cold dryer for about 5 minutes before using the gas.

2. It is recommended that the side of the power cable connected to the machine should be against the wall, with the front side at least 1 meter away from the wall and the back side at least 20 cm away from the wall.

3. The drain time can be adjusted. If it needs to be adjusted longer, the SEC key on the left can be adjusted to 2 seconds, and the MIN key on the right can be adjusted to 5 minutes (0-10 middle).

4. Be sure to wrap raw material tape or use liquid sealant when installing.

Notice:

1.Different places have different Receptacles. Please note this plug and consult your electrician before purchase.

2.This machine needs to be connected to the power source for use by the customer.

ProductSiteLaunchDate : 2025-04-06T22:45:13.357Z
UnspscCode : 40101701