Cart 2 india

Specification
Brand : KiWAV
BulletPoint1 : With the Magazi BSD system 79 GHz short-range radar, you can ride with more confidence and safety. The warning zone of the system covers left and right adjacent lanes with up to 25m range.
BulletPoint2 : LED indicator designed to attach to the both sides of the mirror frame in two ways, direct bolt-on or extend a mounting point with an extended bracket. It signals you when there is traffic coming into your blind spots. This will increase rider awareness to surrounding traffic conditions.
BulletPoint3 : The BSD system is automatically activated when the motorcycle is started.
BulletPoint4 : Easy installation - most motorcycles can be equipped in under an hour, with one radar sensor mounted to the license plate frame. Power for the system is from the bike's 12V acc power source. Then, indicators that light up are placed near the bike's mirrors.
BulletPoint5 : Our BSD system is NOT RECOMMENDED if your motorcycle has: The exhaust placed too close to the license plate, the heat from exhaust gases will damage the radar sensor. The license plate is not located directly behind the motorcycle. The distance from the ground to the license plate is lower than 60 cm (23.62 inch) or higher than 80 cm (31.5 inch). (Adjust as needed based on your vehicle's specific situation.) There is no space for the radar sensor on the both sides of the license plate.
ExteriorFinish : Paint
ExternallyAssignedProductIdentifier1 : 0680577079526
ExternallyAssignedProductIdentifier2 : 680577079526
ItemName : KiWAV motorcycle 79GHz BSD LCA blind spot detection system lane change assist BSDII with LED indicators compatible for Harley Street XG 500 750
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-security-complete-systems
Manufacturer : KiWAV
NumberOfItems : 1
PartNumber : 100162402008600
PartTypeId : 0680577079526
ProductDescription : BSD material: radar body material: Hi-impact plastic housing, radar bracket material: Aluminum, indicator material: Aluminum, indicator bracket material: Steel
BSD SPEC
Operating frequency: 79 GHz
Multifunctional: BSD and LCA
Storage temp: -40°C ~ +90°C
Operating temp: -40°C ~ +85°C
Input voltage: 12V
Distance measurement: RCW 25m
Speed measurement: 5~+70 kph
Current consumption: 126mA @12V
Dust & waterproof compliant: IP67
Specifications: ISO 16750
Radiation regulations: FCC/NCC
 
Weight: n.w.: 742 g./ 1.63 lbs. (pair), g.w.: 1090 g./ 2.4 lbs. (total package, with packing)
Package:
LED indicator x 2, bracket for indicator x 2,
10mm standard thread bolt x2, 10mm reverse thread bolt x1,
8mm standard thread bolt x2, 8mm reverse thread bolt x1, bolt cap x2,
5/16" bolt x 2, wire harness set x 1,
BSD radar x 1, bracket for radar (L type) x 1, bracket for license plate x 1
Compatibility:
-Direct bolt-on on mirror perch:
Compatible with XG Street 500/750 series 2015-
*This set does not fit a Street Rod 750 (XG750A).
If you wish to install on a Street Rod 750 (XG750A), you would need to customize the mount.
 
Apply the indicators under your mirrors with the extension brackets:
For any mirror bolt stud under 10mm.
Note:
Our BSD system is NOT RECOMMENDED if your motorcycle has:
1. The exhaust placed too close to the license plate, the heat from exhaust gases will damage the radar sensor.
2. The license plate is not located directly behind the motorcycle.
3. The distance from the ground to the license plate is lower than 60 cm (23.62 inch) or higher than 80 cm (31.5 inch). (Adjust as needed based on your vehicle's specific situation.)
4. There is no space for the radar sensor on the both sides of the license plate.
ProductSiteLaunchDate : 2023-06-02T10:16:55.780Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 25170000