Cart 2 india

Specification
Brand : BuyUneed
BulletPoint1 : 4:1 Shrink Ratio : Heat shrink tubing 4:1 recovers to 1/4 of its original diameter,shrink was quick and solid ,makes a tight seal and easier to cover various difference size wires cables
BulletPoint2 : Dual Wall With Adhesive Glue : Wear resistant,strong connection not easy to tear adhesive lining of the shrink tubing provides a good watertight seal around the wires
BulletPoint3 : Easy to Use :Simply slide the heat shrink tubing over the connection point and heat it up;easy to use can be shrink by heating with hot air gun
BulletPoint4 : Size selection :Heat shrink tubing diameter (Rounded Condition)available in black and clear colors, sizes include 1/2“, 5/8”, 1” lengths available 18 ft
BulletPoint5 : Multiple Applications :Used in industrial , marine and automotive wire connection provides protection for electronic components, wire splices, harnesses and harness branches
Color : Black
ControllerType : Button Control
ControlMethod : application
ElectricFanDesign : blower
ExternallyAssignedProductIdentifier1 : 0768362777038
ExternallyAssignedProductIdentifier2 : 768362777038
ExternallyAssignedProductIdentifier3 : 00811080028224
IncludedComponents : 30 FT Blue Power/Ground Wire/Cable
InstallationType : Freestanding
ItemName : BuyUneed Heat Shrink Tubing 4:1 Dual Wall Adhesive Liner Wires Cable Wraps Connection Protection (Black, 1/2"-18ft)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 4 inches
ItemPackageDimensions_Width : 7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : vehicle-amplifier-tubing
Manufacturer : MTADSHES4R
Material : polyolefin
ModelNumber : 1/2 inch black 4:1 heat shrink tubing
MountingType : Clip On
NumberOfItems : 1
NumberOfSpeeds : 2
NumberOfWires : 1
PartNumber : PC0-20Blue
ProductDescription : Parameters:
Material: Polyolefin.
Shrinkage Temperature: -50(℉)～257(℉).
Shrinkage Ratio: 4:1.
Withstand Voltage: 600V.
Tensile Strength: ≥12 Mpa.

Color:
Clear,black.

Size:
1/2 in(12 mm) Diameter. 5/8in(16mm) Diameter.1 in(25 mm) Diameter

Length:
18 Feet .
24 Feet
Note:
Before placing an order, you need to measure the size of your wires. The size of the heat shrink tubing is in the round state, not the flat width.

Use Steps:
1: Measure the diameter and length of the wire.
2: Use scissors to cut the length of the required diameter of the heat shrink tubing.
3: Connect the wires and put on transparent heat shrink tubing.
4: Heat the shrink tubing evenly with a heat gun or hair dryer. Lighters are not recommended. Because improper operation may burn black
ProductSiteLaunchDate : 2024-08-27T03:47:16.126Z
Size : 1/2"-18ft
Strands : 55
StreetDate : 2018-08-12T00:00:01Z
Style : marine grade 4:1 heat shrink tubing
SupplierDeclaredDgHzRegulation : not_applicable
Theme : Car
UnitCount : 1
UnspscCode : 24141500
Voltage : 12 volts
WarrantyDescription : 1 years
Wattage : 400 watts